sickno Posted March 28, 2008 Share Posted March 28, 2008 The following may be a very good introduction / manual for Hong Kong users who are interested in using DVBViewer with their DMB-TH DigitalTV USB Receiver: http://www.hkepc.com/forum/viewthread.php?tid=954196 In case you do not understand Chinese, I have translated the topic into English below, if you have found out any translation errors or have better translation suggestions, please feel free to correct me. -------------------------------------------------------------------------------------- If you want DVBViewer to be displayed in Chinese language, you will need this: Chinese (Traditional) : *NEW* 3.9.3.41b http://www.DVBViewer.info/forum/index.php?showtopic=25825 Chinese (Simplified) : *NEW* 3.9.3.41b http://www.DVBViewer.info/forum/index.php?showtopic=25825 Unzip the file to C:\Program Files\DVBViewer\Language and then change the language settings in DVBViewer [HKEPC Original] DVBViewer tutorial+collections of tips (Chinese EPG, PIP, Record 4 Channels at the same time, Scheduled Recording, Chinese Interface, Enhancements/Tips) [updated: 2008-4-27] Latest version: 3.9.3.45beta When reproducing the content, please specify the original content comes from HKEPC.com http://forum.hkepc.com/viewthread.php?tid=954196 Special thanks to all HKEPC forum friends for their research and information, please feel free to contribute further information. English translation + Chinese Interface download (Official Chinese Interface has been added to DVBViewer since 3.9.3.26 beta): http://www.DVBViewer.info/forum/index.php?showtopic=25717 (translated by HKEPC forum member ngsickno #39) Advantages of DVBViewer DVBViewer is better than TotalMedia in many ways. Unlike TM, when using DVBViewer, you will never encounter system hang up issue even when hardware acceleration is turned on. Also, you will not encounter the channel switching problem when ATV (Asia Television) broadcast changes from SD to HD broadcast 8pm every night. Not only that, DVBViewer allows you to choose your own favorite decoder (e.g. CyberLink, CoreAVC, ffdshow, AC3Filter, etc.) Even better, DVBViewer provides a lot of features that TM simply cannot match, including custom plugins to further enhance the already rich feature set DVBViewer has already provided. Their official website has also a forum to allow you to post your comments and suggestions on how to improve DVBViewer! It is really worth spending HK$151 to buy the software. The posts #1 - #8 below Will teach you from how to buy, install, setup, record, pip, record 4 channels at the same time, perform editing, adding plugins to enhancements/techniques :boxing: For example: How to automatically view TVB channels' subtitles when you start up DVBViewer / immediately after switching channels Viewing 16:9 programmes in full screen with 4:3 or 5:4 monitors Viewing windowbox programmes in full screen with 16:9 or 16:10 monitors etc 2 Quote Link to comment
sickno Posted March 28, 2008 Author Share Posted March 28, 2008 (edited) #################################################### PURCHASING You can go to http://www.DVBViewer.com/enb/index.php?page=order to purchase DVBViewer online If you want to pay by Paypal, you are suggested to click on the $ sign, so that you can buy it for US$19, this is cheaper in compared to paying by Euro. If you do not have a Paypal a/c, you can register an account and then pay afterwards, it is very easy to pay. Remember do not fill in fake contact details, or beware of not getting your copy of software After confirmation, an e-mail containing your license will be sent to your Paypal e-mail. After that you can go to DVBViewer's members area (URL included in e-mail) to download DVBViewer related software including beta, plugins, filters, tools etc #################################################### INSTALLATION First, download the program from DVBViewer's member's area and double click the program to install When installing, you should see the following screen, type in the license details that is specified in the DVBViewer e-mail You are suggested to choose "For all Users" in the following screen After installation, you can start DVBViewer straight away #################################################### BASIC SETTINGS + SWITCHING BETWEEN CHANNELS When you open DVBViewer for the first time, you will get a blank screen You have to go to "Settings" > "Options" to setup the hardware Edited April 20, 2008 by sickno Quote Link to comment
sickno Posted March 28, 2008 Author Share Posted March 28, 2008 (edited) Go to "hardware" tab and select your DVB device as indicated in the image below I use Mygica D268 USB stick, and the device name is shown as "Digital TV" Make sure you set "Digital TV" as "preferred" device and "terrestrial" type as well Be patient and do not try to search for channels just yet, because you have to set the decoder first Go to the "DirectX" tab, configure the "renderer" and "decoder" as in the image below If you are using XP, you are suggested to use "VM9 Renderer", if you are using Vista, you should choose "Vista EVR" If your display card supports hardware acceleration, you can use CyberLink decoder In the image below, the option "Use DVBSource for MPEG files" can give a more stable video view and you are recommended to select it And the option "VMR Options" is for hardware acceleration display ratio problems e.g. cannot detect 16:9, select it if required My XP settings is a follows: Vista settings: Now you can perform the channel scan: Alternatively, you can also import Channel List HKEPC Post #7 has my Chinese Channel List: http://forum.hkepc.com/viewthread.php?tid=...e=1#pid15284287 (The channel list is for receiving signals from the Tsz Wan Shan station, may not be suitable for everyone, but you are advised to give it a try) Import Method First go to Channel > Channel Editor Then click the import / export buttons located on the bottom left After the scanning is complete, you should be able to see the Channel List Edited April 20, 2008 by sickno 1 Quote Link to comment
sickno Posted March 28, 2008 Author Share Posted March 28, 2008 (edited) To setup display ratio, you can choose 16:9 / "auto + autosize" (as in the image below) If you want to zoom, you can right click the screen > View > Zoom xx% INTERFACE Default Interface A: Show the status bar B: Full Screen C: Hide Tool, Status Bar and Menu D: Open Teletext window (currently useless for HK DMB-TH) E: Open EPG Window (EPG) F,G: Change Channel H,J: Change station K,L: Volume M: Open Channel List N: Setup display colour, audio balance P: Start Recording Statistics Window Q: Start/Stop Recording Status Bar R: Display Channel Name S: Click one time to switch to programme time count down mode (blue bar), how many % have been played (blue bar), signal strength(green bar; red bar means weak) T: Current Sound, AC2.0, some TVB programmes 2nd audio channel is AC5.1 U: Screen Ratio V: Resolution and Frames Per Second W: Sound Bitrate X: Channel Bitrate (HD Jade is using 14.8Mbit) CHINESE LANGUAGE INTERFACE DOWNLOAD http://www.DVBViewer.info/forum/index.php?showtopic=25717 (By HKEPC Member ngsickno Translation #39) Those who want Chinese interface can now get it Edited April 20, 2008 by sickno Quote Link to comment
sickno Posted March 28, 2008 Author Share Posted March 28, 2008 (edited) #################################################### RECORDING Before recording, you need to first go to "Options" in the "Recorder" tab First setup a target recording folder The Output Format should be set to "TS" Format options should tick "DVB Subtitles" and "all audiotracks", so that after recording, TS files can have all the audio similar to NICAM in analog TV Below has a "Use smart buffer" option, you can set it to a larger value, so that the recordings will always be smooth without choppy video Now for the "Recordings" tab, you can setup the file name here You are recommended to delete %event to avoid recording problems due to EPG encoding issue #################################################### Screenshot Note: This is only supported under 3.9.3.25 beta or later version Go to the "General" tab De-select "Use EPG for screenshot filename" as indicated in the image below, to prevent saving issue due to encoding issue Then select the screenshot type You can also setup image capture shortcut, and the method is as below screenshot captured is also placed under the recording target folder #################################################### SUBTITLES Now for the "subtitles" tab, tick "Enable if Available" Change the Language to "Chinese" Set the Delay to "200" then restart DVBViewer and the subtitles timing should now be correct To start subtitle Right click the screen > Subtitles > DVB: ###### (CHI or CON=chinese, ENG= English) Subtitle and OSD may have incorrect display ratio and showed up strangely The following method works only under 3.9.3.45beta or above To modify subtitles ratio, you can go to Options > OSD Appearance Set Left and Right to 90 in Overscan adjustment located on the top left corner after that subtitle ratio should be correct ATV - MPEG2 channel subtitles normal situation: TVB - MPEG2 channel subtitles normal situation: TVB - H.264 channel subtitles normal situation: #################################################### EPG Note: Only 3.9.3.15 beta or later version supports Chinese EPG First, go to "EPG" tab, then setup EPG as in the below image, finally change the timezone to GMT+8 After restarting DVBViewer, EPG should be displayed correctly When switching channels, you can see the EPG information of the current and next programme You can also open "EPG Window" to view the EPG information Edited April 27, 2008 by sickno Quote Link to comment
sickno Posted March 28, 2008 Author Share Posted March 28, 2008 (edited) #################################################### PIP + RECORD 4 CHANNELS AT THE SAME TIME PIP: Multiple channel recordings is only possible for the following same CH combinations: CH22: TVB Jade, TVB Pearl, aTV Home, aTV World CH35: TVB HD Jade, TVB J2, TVB Interactive CH37: aTV News & Business, aTV His TV, aTV Her TV, aTV Plus TV, aTV HDTV, CCTV4 PIP Example First change to "TVB Jade", Right click the screen > View > Preview Then use "Channel List" to change to "TVB Pearl" The method for recording 4 channels at the same time is similar, all you need to do is to switch to another channel when you are recording a channel You can also use "View Record Plugin (to be introduced in this tutorial later) Please note that we need to de-select "stop stream while tuning" or else when you switch to another channel, the signal will be stopped and recordings will be corrupted To view the details during recording, go to the "Recordings and Device Statistics" window All recordings are in TS format and no problems at all #################################################### RESOLVE SCREEN DISPLAY PROBLEM AFTER SWITCHING CHANNELS If you have encountered display problem after switching between channels You can try to press "View" > "Rebuild Graph" #################################################### SCHEDULED RECORDING Install Recording service The service is able to start the computer from Standby or Hibernate without taskscheduler, in fact you MUST disable the Taskscheduler in the DVBViewer. The computer will be started 3 minutes before the time to let the devices initialize properly. See Official Forum for more information http://www.DVBViewer.info/forum/index.php?showtopic=18273 http://www.DVBViewer.info/forum/index.php?showtopic=19629 Download (login) http://www.DVBViewer.com/members/ Original description from #89 of this post written by HKEPC Forum Member edmondcck: There are two methods... Under "Main Application" there is a DVB Task Scheduler that can allow automatic starting of DVBViewer on a specified time... What the program does is just create a job in Windows scheduler ... so that DVBViewer is automatically started 3 minutes before the scheduled recording time... The second method is what hklam has suggested, that is the Recording service.... this one you do not even need to have DVBViewer turned on... This tool has also got a web interface to allow you to set the schedules....<-- This is actually a simplified version of the Webserver Control, without the streaming function.... but there is a catch, that is Chinese programme name will show scrambled symbols instead of Chinese characters, the full feature Webserver Control on the other hand, do not have this issue... I myself use the Recording service....it is more convenient, just install the service, and let it run automatically and that's it... #################################################### PLAYING The recorded TS files can be played with MPC, KMPlayer, Windows Media Player If you want to see the subtitles or 2nd audio channel as well, you can use DVBViewer to play the file Simply press DVBViewer > Open Video #################################################### VIDEO CUTTING TOOL TSPlayer TSPlayer can cut MPEG2 / H.264 TS files and also keep the subtitles and audio channels You can download TSPlayer from the members area of DVBViewer and place it under C:\Program Files\DVBViewer\Plugins Click on the green "icon set start point" and "end point" Then click on the red icon export MPEG2 format can also preserve subtitles and multiple audio tracks You can also set the "decoder" and "Output Settings" in the Options Screen of TSPlayer #################################################### NetStream - NETWORK TV STREAMING This is a quote of the topic written in DVBViewer forum by Lars_MQ: This is (home)network streaming. It streams the channel your are watching into your home network and you can use vlc, mpc or the DVBViewer to view it on a network client computer. You could use it also on the same PC. In most cases the datarate is way too high for streaming into the internet. Member Tips #1 Below is the information from HKEPC member frankiepoon Ref #8: http://forum.hkepc.com/viewthread.php?tid=...e=1#pid15022672 It is very simple: Make sure you install "netstreaming plugin" when installing DVBViewer: Then activate NetStream by going to Plugin > Netstream > active And the choose "configure", type in your ip; I am using a router, so mines is 192.x.x.x After that, type in port/use the default port; if you are using router, make sure it is the port of your router~ Then choose Subtitle and Audio in the following screen Next, start VLC Player and open your URL as below File > Open File > Network > http 123.x.x.x:2345 (IP:Port no.) Finally, click ok and you are done. The quality is the same as the broadcast quality~ If you have a lot of bandwidth, you can increase the number of users in "max. Users" P.S. You can also select the audio track and subtitles too Member Tips #2 Below is the information from HKEPC member FOWLER NEVER BEATEN Ref #8: http://forum.hkepc.com/viewthread.php?tid=959100 I always work at night and do not want to miss any TV programmes, so I will stream tv broadcasts for viewing at work place, below is what I do to to perform the streaming (Because of VLC codec problems, My methods only stream 4 old digitized anolog channels + J2 channel + TVB Interactive Channel) First, let me talk about my DEVICE PC: e2160, 2G ram, Mygica USB Software: DVBViewer, VLC There are two methods Method 1 1. Start DVBViewer > plugin > Netstream > "TICK" active , then > Configure This page allows you to choose which IP and port # you want to allow Steaming, IP is your LAN CARD IP I have a ROUTER, so I use an internal IP for PORT #, I use 1234 2. Open VLC on the PC that you want to view the video stream File > Open Network Stream Enter your DVBViewer Machine's IP and port # to HTTP URL Because I use another machine to view So I only need to set the internet IP address of my DVBViewer server, If you want to stream to Internet users, the other party's VLC has to input your REAL IP This method is the simplest and was discussed before in ezone However if you want to stream to the Internet, and you have limited UPLOAD bandwidth, you will get into trouble The reason is because the 4 old digitized analog channels alone has 4-5Mbps each If your broadband is not fast enough, then what can you do? The answer is to use Method 2 Method 1 discussed how you can use DVBViewer + VLC to view the stream But the bandwidth of your broadband connection has to be 4-5Mbps, and not everyone have such huge bandwidth Now method 2 should be able to solve your problem 1. Same as step 1, first configure DVBViewer NetStream Setting 2. I use the same machine to open VLC, so the method is the same as step 2 in Method 1, go to DVBViewer, setup IP and port number 3. In Advanced Options, choose "Stream/save" > "Setting" 4. Go to stream output page "Http" type in your streaming PORT, because DVBViewer has already used 1234, so here I use 2345 instead "Transcoding options" - this part helps you compress DVBViewer stream into another format, and then stream to the Internet for VLC viewing Below is to compress video to 1024kbps mp4 and audio to 192kbps mpga 1024+192 = 1296Kbps = 152KBps This way, you save a lot of upload bandwidth So the above are the two streaming methods I use I am not good in writing, so please correct me if I am wrong If you have better methods, please post here! Edited April 10, 2008 by sickno Quote Link to comment
sickno Posted March 28, 2008 Author Share Posted March 28, 2008 (edited) #################################################### USING DVBViewer BETA You can download the latest DVBViewer Beta from the members area Currently, the latest beta is 3.9.3.45 This beta has added Chinese Languages (Simplified and Traditional) support and also fixed Chinese EPG and Subtitle issues For more details, visit: http://forum.hkepc.com/viewthread.php?tid=951998 To use the beta First install 3.9.2.0 (The release version) After that, make a copy of your DVBViewer located in C:\Program Files\DVBViewer Now, extract the 3.9.3.45beta files to the new folder This way, you will not destroy the release version 3.9.2.0 You can also create shortcuts for faster executing DVBViewer Beta Before you start the Beta version,you should first backup the Data folder Method: "Start Menu" > "Programs" > "DVBViewer" > "Data folder" XP Actual Location: C:\Documents and Settings\All Users\Application Data\CMUV\DVBViewer Vista Actual Location: C:\ProgramData\CMUV\DVBViewer ENHANCEMENTS / TECHNIQUES In this session, I will introduce modifications to setup.xml to enhance your subtitle viewing efficiency For modification, you can go to Start Menu > Programs > DVBViewer > Data Folder That is, for XP: C:\Documents and Settings\All Users\Application Data\CMUV\DVBViewer for Vista: C:\ProgramData\CMUV\DVBViewer Then open setup.xml with Notepad AUTOMATIC LOADING OF SUBTITLES WHEN OPENING DVBViewer/SWITCHING CHANNELS You may found that when you start DVBViewer or after switching channels, DVBViewer will no longer load TVB subtitles Everytime you need to right click the screen > subtitles >DVB:CON But you may also found that aTV channels has no such problems For this issue, you can open setup.xml with Notepad (For safety reason, you should backup before editing) Find <section name="Subtitles"> Then change Language2 to con (as in the image) Language1 keep using chi After that, TVB and aTV subtitles should be displayed automatically by DVBViewer Viewing 16:9 programmes in full screen with 4:3 or 5:4 monitors When viewing 16:9 programmes in full screen with a 4:3 or 5:4 monitor You may found out that both top and bottom of the screen contains a black box area (letterbox) HKEPC forum member Polynomials suggested in post #63 on how to solve the problem Ref: http://forum.hkepc.com/viewthread.php?tid=...e=7#pid15304644 First, we change to full screen, then right click > "zoom..." (note the "..." after zoom) After that, we can click "Pan & Scan" or "Recall#" to zoom I suggest you use Recall# to zoom, because this can be reverted back to normal easily After pressing Recall#3, you should be able to zoom to a level where letterbox disappear Viewing windowbox programmes in full screen with 16:9 or 16:10 monitors Similar to the "zoom..." method above, you can also view windowbox programmes in full screen with 16:9 or 16:10 monitors The following programme used windowbox: After pressing Recall #3: Edited April 27, 2008 by sickno 2 Quote Link to comment
sickno Posted March 28, 2008 Author Share Posted March 28, 2008 (edited) #################################################### PLUGINS You can download lots of plugins from the member's area to enhance DVBViewer's functionality After installing a plugin, you can start it from "Plugins" > Select ###### (The more you install, the more it is listed in the Plugins menu) VIDEO RECORDER - SIMPLE MULTI-CHANNELS RECORDING The Video Recorder Plugin allows you to record multiple channels that is in the same CH22/35/37 By using this plugin, you do not even need to manually change between channels, and you have the option to choose which audio track you want to record First select the target folder, then select which channel and audio track you want You can also choose the file name, mpg format, and you can also set action and time AUDIO RECORDER You can choose from different formats of audio For example MP3, OGG etc MP3 settings: OGG settings: VIDEO POST PROCESSOR PLUGIN The Post Processor Plugin inserts a new entry "Video Post Processor" in the DVBViewer's Plugins Menu, allowing you to select a post processor like ffdshow, NVidia etc. for video playback, provided it is installed in your system, or "None" (default), if you don't want to use a post processor. A new post processor setting triggers "Rebuild Graph" in DVBViewer. Each time when the chain of playback components (the filter graph) is rebuilt, the plugin tries to insert the selected post processor between the video decoder and video renderer. #################################################### OTHER TUTORIALS, COMING SOON WE WELCOME YOUR COMMENTS AND TIPS SUGGESTIONS AND PROPOSALS Edited April 10, 2008 by sickno Quote Link to comment
mr_chaela Posted March 28, 2008 Share Posted March 28, 2008 Good post, unfortunately the links to images not working. Quote Link to comment
sickno Posted March 28, 2008 Author Share Posted March 28, 2008 (edited) Good post, unfortunately the links to images not working. fixed! Thank you for upgrading my account Lars_MQ. Edited March 29, 2008 by sickno Quote Link to comment
Lars_MQ Posted March 29, 2008 Share Posted March 29, 2008 but this forum has attachment space limits I upgraded your account, you should have enough space now. I also pinned the thread. Quote Link to comment
Gary Lam Posted March 29, 2008 Share Posted March 29, 2008 I have updated the original Chinese version of tutorial to meet the version 3.9.3.25 or 3.9.3.26. e.g. the topic of screenshot, pan & scan function http://forum.hkepc.com/viewthread.php?tid=954196 If you have found out any information is wrong or misleading, please feel free to correct me. 2 Quote Link to comment
sickno Posted March 29, 2008 Author Share Posted March 29, 2008 I have updated the original Chinese version of tutorial to meet the version 3.9.3.25 or 3.9.3.26.e.g. the topic of screenshot, pan & scan function http://forum.hkepc.com/viewthread.php?tid=954196 If you have found out any information is wrong or misleading, please feel free to correct me. Updated, please let me know if there is anything I have missed, thank you! Quote Link to comment
Lars_MQ Posted March 29, 2008 Share Posted March 29, 2008 A correction: NetStream - INTERNET TV STREAMING This is (home)network streaming. It streams the channel your are watching into your home network and you can use vlc, mpc or the DVBViewer to view it on a network client computer. You could use it also on the same PC. In most cases the datarate is way too high for streaming into the internet. Quote Link to comment
sickno Posted March 29, 2008 Author Share Posted March 29, 2008 A correction: This is (home)network streaming. It streams the channel your are watching into your home network and you can use vlc, mpc or the DVBViewer to view it on a network client computer. You could use it also on the same PC. In most cases the datarate is way too high for streaming into the internet. Thanks for pointing out Quote Link to comment
sickno Posted March 30, 2008 Author Share Posted March 30, 2008 (edited) Updated Please note that changes have been made to "#3 NetStream" Also, I have added Chinese (Traditional).lng to the first post Edited March 30, 2008 by sickno 1 Quote Link to comment
hdv Posted March 30, 2008 Share Posted March 30, 2008 Hello, Also, I have added Chinese (Traditional).lng to the first postthe best would be to post this in this part from the forum -> http://www.DVBViewer.info/forum/index.php?showforum=18 PS: thanks for your input to this forum! 1 Quote Link to comment
sickno Posted March 31, 2008 Author Share Posted March 31, 2008 Hi, The language file is not posted to forum 18 because I think that some more parts can be further translated from English to Chinese. I have just updated the file today and I have marked this new version as Alpha 2 and it is available at the first post. 1 Quote Link to comment
Gary Lam Posted April 1, 2008 Share Posted April 1, 2008 Hi, The language file is not posted to forum 18 because I think that some more parts can be further translated from English to Chinese. I have just updated the file today and I have marked this new version as Alpha 2 and it is available at the first post. Good quality of translation ! However, I think some words can be corrected base on the Chinese Windows format. 插入件(P) should be 外掛程式(P) 檢視(V)>總在最上層(A) should be 顯示在最上層(A) 設定(S)>顯視(D) should be 顯示(D) Quote Link to comment
sickno Posted April 1, 2008 Author Share Posted April 1, 2008 Good quality of translation ! However, I think some words can be corrected base on the Chinese Windows format. 插入件(P) should be 外掛程式(P) 檢視(V)>總在最上層(A) should be 顯示在最上層(A) 設定(S)>顯視(D) should be 顯示(D) Updated, thanks! 1 Quote Link to comment
sickno Posted April 4, 2008 Author Share Posted April 4, 2008 Added the Chinese (Simplified) Language file download link (thanks to Gary Lam) Quote Link to comment
JBT Posted August 12, 2008 Share Posted August 12, 2008 (edited) I'm using Mygica U6888 Y TV Stick on Gigabyte MA78GPM-DS2H main board, Athlon 64 X2 6000+, 4GB RAM, Vista Ultimate + SP1. I'm using the latest ATI v8.7 Display Driver. With the hardware driver & Total Media 3.5 installed, I can scan & view all 13 digital TV channels in my area. Total Media freezes the screeen once in a while. I have to shutdown the application and start it again to resume it to operation. I uninstall Total Media, installed PowerDVD & updated to v8.0.1830.50, kLite Mega Codec Pack 4.1, Windows6.0-KB951685-x86.msi and finally DVBViewer v3.9.4. I followed the tutorial on setting the Options regarding Hardware and DirectX. All the options including Video Renderer, Audio Renderer, MPEG2 Video Decoder, H.264 Video Decoder, MPEG Audio Decoder, AC3 Audio Decoder are set as described. However, I can't locate the "View"-->"Filters" menu item within the DVBViewer program. Then I skipped to the Channel scan function under which all the 13 digital TV channels are found. When I opened the Channel List and tried to view a channel, the message "Cannot load Source Filter, error: 0x80040154 (class not registered)" was displayed on the main DVBViewer window. No video can be viewed. Selecting any of the scanned channels, as well as shutting down the program and starting it again, resulted in the same error message displayed. I have no clue on what caused this error message and no idea on what & how to deal with it. Can anyone help me? Thanks in advance. Edited August 12, 2008 by JBT 1 Quote Link to comment
Menkatek Posted February 4, 2009 Share Posted February 4, 2009 I'm in HK and thinking of buying the DVBViewer program to work with my AVer A855 USB tuner. But I'd like to keep using the tiny remote that comes with the package. Would it still work with DVBViewer? 1 Quote Link to comment
ter9999 Posted April 4, 2010 Share Posted April 4, 2010 Chinese users can join QQ live discussions by group number: 13042853. We track latest updates and issues discussions wrt DVBViewer and the plugins, etc. We only accept legitimate DVBViewer users. Quote Link to comment
ter9999 Posted April 4, 2010 Share Posted April 4, 2010 如果你是正版DVBViewer用户,欢迎加入下面的 “正版DVBViewer交流群”:13042853 Quote Link to comment
jazza Posted August 7, 2010 Share Posted August 7, 2010 i have a idea about make it in Indonesian Lang.... 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.