Configuring remote control

[tolinn]

I have this device:

http://cgi.ebay.com/Digital-USB-DVB-T-HDTV...=item2eab52aabe

 

 

The remote only works with BlazeTv software.

I guess it comes with a special driver for this application.

Rc_reader

 

There is a default.ini file:

 

[General]
Name=CE6230RC
Plugin=CE6230RC.dll
[Custom]
MaskCode=0x00FF
[CommandMaps]
1=Power_Off,0,0,0,0,0x30,0,0,0
2=Mute,0,0,0,0,0x18,0,0,0
3=OnNextSubTitile,0,0,0,0,0xe8,0,0,0
4=Pause,0,0,0,0,0xf0,0,0,0
5=AddCapture,0,0,0,0,0x20,0,0,0
6=ReturnLastChannel,0,0,0,0,0xe0,0,0,0
7=GenerateHotkey,8,38,0,0,0xc8,12,0,0
8=GenerateHotkey,8,40,0,0,0xa0,12,0,0
9=GenerateHotkey,8,37,0,0,0xa8,12,0,0
10=GenerateHotkey,8,39,0,0,0x40,12,0,0
11=Next_Chapter,0,0,0,0,0x00,0,0,0
12=Previous_Chapter,0,0,0,0,0x80,0,0,0
13=Volume_Down,0,0,0,0,0xc0,0,0,0
14=Volume_Up,0,0,0,0,0x40,0,0,0
15=Num_1,0,0,0,0,0x88,0,0,0
16=Num_2,0,0,0,0,0x48,0,0,0
17=Num_3,0,0,0,0,0xc8,0,0,0
18=Num_4,0,0,0,0,0x28,0,0,0
19=Num_5,0,0,0,0,0xa8,0,0,0
20=Num_6,0,0,0,0,0x68,0,0,0
21=Num_7,0,0,0,0,0xe8,0,0,0
22=Num_8,0,0,0,0,0x18,0,0,0
23=Num_9,0,0,0,0,0x98,0,0,0
24=Num_0,0,0,0,0,0x08,0,0,0
25=Record,0,0,0,0,0x90,0,0,0
26=Stop,0,0,0,0,0x10,0,0,0
27=Full_Screen,0,0,0,0,0x58,0,0,0

 

Is it possible to make it work with DVBViewer?