Jump to content

Transedit Hauppage2250


Recommended Posts

Hello i installed windows 7 and transedit now i can't scan or analyze none of the atsc signals i press analiyze but it give me 0% signal and a lot of pids with errors i think transedit scan it as cable QAM insted of atsc and if i change use standard interface and choice atsc then i get the initializing the dvb device has failed error :/ is theres any chance to fix this? i would really appreaciated

Link to comment
Hello i installed windows 7 and transedit now i can't scan or analyze none of the atsc signals

TransEdit-Version? Did it work before? If yes, under which conditions?

 

i think transedit scan it as cable QAM insted of atsc

What is the detected tuner type in the hardware settings?

Link to comment

Im using the 3.8.2 and when i had windows xp i used the 3.6.0 and atsc channels works perfect, i already installed the 3.6.0 here on w7 but i got the same error, transedit showed as atsc/qam, i notice that DVBViewer won't scan channels too if i leave out the use internal network filter option dvbviwer says theres no device if i choice, it detects the card but scan 0 channels :(

post-87451-0-32038700-1324143843_thumb.jpg

post-87451-0-06439000-1324143851_thumb.jpg

Link to comment

There are two Hauppauge entries in the hardware list. A dual tuner card, I guess. What about the second tuner? Set the first one to "Don't use" if you want to try.

 

Please also try the "Use standard interface" option, and attach the file TransEdit.ini here (located in the configuration folder, see Info Menu in TransEdit). It will tell me more than screenshots.

Link to comment

There are two Hauppauge entries in the hardware list. A dual tuner card, I guess. What about the second tuner? Set the first one to "Don't use" if you want to try.

 

Please also try the "Use standard interface" option, and attach the file TransEdit.ini here (located in the configuration folder, see Info Menu in TransEdit). It will tell me more than screenshots.

 

Yes is a dual tuner i set one as normal and the other don't use and dosen't work i got the same, if i choice use standard interface then i got the error "Initializing the dvb device has failed" when i used xp i set "standard interface" and tuning space: atsc but it won't work here, i attach the ini file hope that helps! =)

TransEdit.ini

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...