Jump to content

4K signal auf Astra 3B


boborg

Recommended Posts

Ja, oder eine Grafikkarte die das kann. Ich hab hier mit DivX Dekoder (andere gehen irgendwie gar nicht) eine CPU Last von 10%. Bei normalen 720 oder 1080 HD liegt das hier bei 2% oder weniger.

Meine GTX 465 kann die Übertragung 1a darstellen, allerdings habe ich keinen Monitor der die Auflösung auf die Reihe bekommt.

Link to comment

Hi to all.

 

I'm getting buffer oveflows that cause interruptions with the DVBViewer Pro filter and this transmission. With SmartDVB and the old AltDVB I have no such problems (the video is somewhat slow in all cases). My pc is based on a C2D E8400 and a GT430 video card. My DVB card is a TBS6925.

 

th_service2-dvbviewer.jpg

Edited by strs65
Link to comment

Der H.264 Videostream alleine belegt auf dem Transponder ca. 40 MBit/s. Drei Minuten Aufnahme ergeben 863 MB. Das ist allerhand.

 

Wer mit dem Begriff "4k-Signal" nichts anfangen kann: Das ist UHDTV (Ultra-HDTV) mit 3840 x 2160 Pixeln.

Link to comment

Thanks!

 

What I don't understand is that I don't have those buffer overflows and interruptions with SmartDVB and AltDVB. Is there something I could try, or do I need a more powerful PC (something which is in my plans anyway)?

Link to comment
I don't have those buffer overflows and interruptions with SmartDVB and AltDVB.

Other kind of error handling. What you can try: Start a recording and then play the file while it is recorded. Reading from a file doesn't require catching up with the broadcasted data rate.

Link to comment

Other kind of error handling. What you can try: Start a recording and then play the file while it is recorded. Reading from a file doesn't require catching up with the broadcasted data rate.

 

Nice one, thanks! It plays slowly too (I believe I can't avoid that) but without interruptions!

 

th_service2-dvbviewer2.jpg

Edited by strs65
Link to comment

Können sie auch 23,5 Ost 12402,V,30000 DVB-S2/8PSK 5/6 50Mbps empfangen? Ich habe Signal aber der Kanal wird nicht gefunden.

 

Ich sehe zwar den Datenstrom im TransEdit-Analyser, aber Bilder bekomme ich da nicht raus. Wer weiss wie das codiert ist.

Link to comment

Der hauptstream 0x00FF ist verschlüsselt. Weiter fehlt der payload unit start indicator, der auch bei einem verschlüsselten PES erkennbar sein müsste. Entweder ist es kein verschlüsselter videostream oder es ist keine CSA-verschlüsselung. Es gibt anscheinend noch eine versteckte PMT mit PID 0x0060. Transedit erkennt die nicht, da es syntaxmässig keine PMT ist. In dieser "PMT" gibt es allerdings hinweise auf einen videostrom. Nützt aber alles nichts.. :shifty:

Link to comment

The transmission is also on Astra 2B (28.2°E) 12441 MHz, Vertical, SR 29500, FEC 3/4, DVB-S2/8PSK.

Too fast for my PC. DVBViewer won't display at all (from RS, with LAV decoder) but it will record for slow playback in Media Player.

Link to comment

Der hauptstream 0x00FF ist verschlüsselt. Weiter fehlt der payload unit start indicator, der auch bei einem verschlüsselten PES erkennbar sein müsste. Entweder ist es kein verschlüsselter videostream oder es ist keine CSA-verschlüsselung. Es gibt anscheinend noch eine versteckte PMT mit PID 0x0060. Transedit erkennt die nicht, da es syntaxmässig keine PMT ist. In dieser "PMT" gibt es allerdings hinweise auf einen videostrom. Nützt aber alles nichts.. :shifty:

 

23E_12402V.png

 

PMT pid 0060 use new nano C9 , SID missing in PAT and SDT

post-20113-0-73004000-1347219321_thumb.png

Edited by EnoSat
Link to comment

Hi to all.

 

I'm getting buffer oveflows that cause interruptions with the DVBViewer Pro filter and this transmission. With SmartDVB and the old AltDVB I have no such problems (the video is somewhat slow in all cases). My pc is based on a C2D E8400 and a GT430 video card. My DVB card is a TBS6925.

 

th_service2-dvbviewer.jpg

 

my TBS5925 resolution show ok , buffer too overflow

28E_12441V_4k.png

Edited by EnoSat
Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...