Jump to content

Recommended Posts

vxl

OS: Windows 10, 64bit.

Tuner: TBS 5980.

Sattelite: 4.9 Astra and 36.0 Eutelsat (connected via DiseqC).

Software: Recording Service + Kodi.

 

Problem: sometimes on channel switch Recording Service hangs up.

 

Last part of log file (svcdebug.log):

27.05.16 11:42:10.904 TBDACITBSModule CI Base SetTuner Entering
27.05.16 11:42:10.904 TBDACITBSModule CI Base SetTuner Leaving
27.05.16 11:42:11.034 TBDACITBSModule WndProc Received PMT ready
27.05.16 11:42:13.173 TUPnPAnnounce InitWsocket 192.168.1.120
27.05.16 11:42:42.740 TRecordingEngine Resume Reset Timer signaled
27.05.16 11:42:42.740 Reset Start
27.05.16 13:14:12.028 TRecordingEngine Standby PBT_APMSUSPEND
27.05.16 13:14:12.029 TUPnPAnnounce Stopped
27.05.16 13:14:12.029 TRTSPWebserver Disconnected
27.05.16 13:14:12.037 Release TBS 5980 CI Tuner
27.05.16 13:14:12.037 Destroy TBS 5980 CI Tuner
27.05.16 13:14:13.043 Destroyed TBS 5980 CI Tuner
27.05.16 13:14:13.044 hamDeleted TBS 5980 CI Tuner
27.05.16 13:14:13.049 TSrvDataModule Freed
27.05.16 17:35:32.504 TRecordingEngine Time changed
27.05.16 17:35:32.737 TRecordingEngine Resume PBT_APMRESUMESUSPEND
27.05.16 17:35:32.737 TRecordingEngine Resume Processing...
27.05.16 17:35:32.737 TRecordingEngine Sleeping -1
27.05.16 17:35:32.737 ReleaseStandbyblock PBT_APMRESUMESUSPEND
27.05.16 17:35:32.740 TRecordingEngine FWakeUp do
27.05.16 17:35:32.740 TRecordingEngine NextEPGUpdate 5/28/2016 12:47:19 AM
27.05.16 17:35:32.740 TUPnPAnnounce Start
27.05.16 17:35:32.741 TUPnPAnnounce InitWsocket 127.0.0.1
27.05.16 17:35:32.758 TRecordingEngine Resume PBT_APMRESUMEAUTOMATIC
27.05.16 17:35:32.758 TRecordingEngine Resume Processing...
27.05.16 17:35:32.758 TRecordingEngine Sleeping 0
27.05.16 17:35:41.597 TBDA_TBS Opendevice bvTurbosight
27.05.16 17:35:41.597 TStreamClient AllocateHardware TBS 5980 CI Tuner
27.05.16 17:35:41.597 TBDA_TBS SetTuner TType: 1, Freq: 11996, Symrate: 27500, LOF: 10750, Tone: 0, Pol: 0, DiseqC: 3, FEC: 3, APID: 305, VPID: 205, PMT: 1905, SID: 19105, TID: 19, NID: 112, SatMod: 6, DiseqCVal: 0, Flags: 25
27.05.16 17:35:42.309 TBDACITBSModule CI Base SetTuner Entering
27.05.16 17:35:42.309 TBDACITBSModule CI Base SetTuner Leaving
27.05.16 17:35:42.507 TBDACITBSModule WndProc Received PMT ready
27.05.16 17:35:43.388 TUPnPAnnounce InitWsocket 192.168.1.120
27.05.16 17:36:12.734 TRecordingEngine Resume Reset Timer signaled
27.05.16 17:36:12.734 Reset Start
27.05.16 17:36:13.140 TStreamClient AllocateHardware TBS 5980 CI Tuner
27.05.16 17:36:13.141 TBDACITBSModule CI Base SetTuner Entering
27.05.16 17:36:13.141 TBDACITBSModule CI Base SetTuner Leaving
27.05.16 17:36:13.389 TBDACITBSModule WndProc Received PMT ready
27.05.16 18:02:08.126 TBaseProcess API_HandleStatus
27.05.16 18:21:23.271 TStreamClient AllocateHardware TBS 5980 CI Tuner
27.05.16 18:21:23.272 TBDA_TBS SetTuner TType: 1, Freq: 12265, Symrate: 27500, LOF: 10750, Tone: 0, Pol: 0, DiseqC: 3, FEC: 3, APID: 403, VPID: 323, PMT: 2903, SID: 31003, TID: 10, NID: 112, SatMod: 1, DiseqCVal: 0, Flags: 25
27.05.16 18:21:23.595 TBDACITBSModule CI Base SetTuner Entering
27.05.16 18:21:23.595 TBDACITBSModule CI Base SetTuner Leaving
27.05.16 18:21:24.023 TBDACITBSModule WndProc Received PMT ready
27.05.16 19:22:15.126 Release TBS 5980 CI Tuner
27.05.16 19:22:15.127 Destroy TBS 5980 CI Tuner
27.05.16 19:22:16.154 Destroyed TBS 5980 CI Tuner
27.05.16 19:22:16.154 hamDeleted TBS 5980 CI Tuner
27.05.16 20:37:02.852 TBDA_TBS Opendevice bvTurbosight
27.05.16 20:37:02.852 TStreamClient AllocateHardware TBS 5980 CI Tuner
27.05.16 20:37:02.853 TBDA_TBS SetTuner TType: 1, Freq: 12265, Symrate: 27500, LOF: 10750, Tone: 0, Pol: 0, DiseqC: 3, FEC: 3, APID: 403, VPID: 323, PMT: 2903, SID: 31003, TID: 10, NID: 112, SatMod: 1, DiseqCVal: 0, Flags: 25
27.05.16 20:37:03.460 TBDACITBSModule CI Base SetTuner Entering
27.05.16 20:37:03.460 TBDACITBSModule CI Base SetTuner Leaving
27.05.16 20:37:03.717 TBDACITBSModule WndProc Received PMT ready
27.05.16 20:46:11.125 TStreamClient AllocateHardware TBS 5980 CI Tuner
27.05.16 20:46:11.126 TBDA_TBS SetTuner TType: 1, Freq: 11843, Symrate: 27500, LOF: 10600, Tone: 1, Pol: 0, DiseqC: 4, FEC: 3, APID: 6252, VPID: 6251, PMT: 6250, SID: 6250, TID: 13, NID: 85, SatMod: 1, DiseqCVal: 0, Flags: 25
27.05.16 20:46:11.768 TBDACITBSModule CI Base SetTuner Entering
27.05.16 20:46:11.768 TBDACITBSModule CI Base SetTuner Leaving
27.05.16 20:46:11.912 TBDACITBSModule WndProc Received PMT ready
Neither Kodi, nor DVBViewer after this problem occurs, could not tune and show any TV channel. DVBViewer shows following error:
post-152462-0-50123000-1464372681_thumb.jpg
Recording Service status hangs at "Stopping" state.
The only way I can get TV back to work is to restart the PC or to restart service using command line:
sc queryex DVBVRecorder
post-152462-0-92702900-1464372892_thumb.png
taskkill /f /pid 1860
net start DVBVRecorder
What could cause this sort of problem? Defective TBS driver? Recording Service bug?
Edited by vxl

Share this post


Link to post
vxl

Thank you for suggestion.

 

I will give this DLL a try.

Share this post


Link to post
Derrick

What CI-module are you using?

Share this post


Link to post
Hop Tzop

I have a similar problem with Recording Service. I was playing a game earlier and when I got in Kodi it showed that it couldn't connect to DVBViewer server. Then I checked in task manager->services and DVBRecorder shows as "Stopping". Can't do anything but restart or kill the service and restart it as vxl mentioned.

 

I'm using a generic chinese tuner. Looks like this:

Digital-satellite-DVB-t2-usb-tv-stick-Tu

Share this post


Link to post
Derrick

This is not a TBS card and there is no CI involved. How could it be a similar problem??

Share this post


Link to post
Hop Tzop

Is the actual result, Recording Service getting stuck, as I said in the previous post. I either have to restart my PC or kill the service using Command Prompt and start it again. This was the only thread I've found specifying the same problem I have.

Edited by Hop Tzop

Share this post


Link to post

  • Similar Content

    • snorre
      By snorre
      DVBWiewer Recording Service Linux / Wine
       
       
      Hardware:
      Ubuntu 18.04 server 1GB RAM 1 Core FSTAB: mount NFS recordings  from NAS to /mnt/recordings Name: dvbsrv  
       
      Software:

      We need wine (32bit version), Xvfb (short for X virtual framebuffer) for
      running the recording service without screen, cabextract for extracting
      the needed DirectX file (ksproxy.ax) and nfs-common for mounting the
      recording share.
       
      dpkg --add-architecture i386 && apt update apt install wine32 xvfb cabextract nfs-common  
       
      Software Wine:
       
      We create a user which is running the Recording Service.
      In the users home we store the needed Windows software parts in the subdirectory "sw".
      SSH to the Ubuntu server as root or become root with "sudo su -".
       
      # create user w/o passwd adduser dvb su - dvb mkdir sw && cd sw wget http://download.microsoft.com/download/E/E/1/EE17FF74-6C45-4575-9CF4-7FC2597ACD18/directx_feb2010_redist.exe cabextract directx_feb2010_redist.exe -F dxnt.cab cabextract dxnt.cab -F ksproxy.ax  
      Files to be stored in /home/dvb/sw:
       
      Total Commander 32bit: tcmd922ax32.exe DVBViewer: DVBViewer_setup_6.1.4.exe Recording SVC: Recording_Service_setup_1.33.02.01.exe FFMPEG 32bit: ffmpeg-20190707-98b122c-win32-static.zip DVB Lic: xxxx.dvbvkey  
       
      Config from Windows DVBWiewer:
       
      This step is optional. You can configure the Recording Service without these.
      I copied the file from the Windows installation to keep my settings.
       
      Channel Logos: "c:\Program Files\DVBViewer\Images\Logos" Plugins: "c:\Program Files\DVBViewer\Plugins" Channels: "c:\Documents and Settings\All Users\Application Data\CMUV\DVBViewer\channels.dat" Allowed Networks: "c:\Documents and Settings\All Users\Application Data\CMUV\DVBViewer\Config\svcuserdata.xml" Rec-Server Config: "c:\Documents and Settings\All Users\Application Data\CMUV\DVBViewer\Config\service.xml" Tuner Config: "c:\Documents and Settings\All Users\Application Data\CMUV\DVBViewer\Config\svchardware.xml" SAT>IP Config: "c:\Documents and Settings\All Users\Application Data\CMUV\DVBViewer\Config\svcnetwork.xml"  
       
      Setup:
       
      Start Xming on Windows client. On Linux Desktop you usually already have a X server running. If using Putty, configure it to have X forwarding enabled. Putty (or ssh -X) to dvbsrv as root.  
      cp .Xauthority /home/dvb/ chown dvb:dvb /home/dvb/.Xauthority su - dvb cd sw  
      Initial Wine start wine cmd exit  
       
      Install Total Commander wine tcmd922ax32.exe - no shortcuts
       
       
      Install DVBViewer wine DVBViewer_setup_6.1.4.exe  - no shortcuts, no FW
       - OK on "Unable to execute file: powercfg.exe" - 10 times
       - Add Key File, Username and Passsword - Key file in Z:\home\dvb\sw
       - Cancel additional components install
       - do not wiew changelog_en.html and do not Launch DVBViewer
       
       
      Install Recording Service wine Recording_Service_setup_1.33.02.01.exe  - no shortcuts, no FW, no Download FFmpeg
       - OK on "Unable to execute file: powercfg.exe" - 10 times
       - do not wiew changelog_en_rs.html and do not Launch Configuration
       - Right click Recording Service System Tray Icon -> Disable Auto-Start Tray Control Program -> Exit
       
       
      Start Total Commander - These steps can also be done manually on Linux or Wine comandline "wine cmd" wine c:\\totalcmd\\totalcmd.exe &  - Configure
       - Copy z:\home\dvb\sw\ksproxy.ax -> c:\windows\system32
       - Open z:\home\dvb\sw\ffmpeg-20190707-98b122c-win32-static.zip
         + Copy z:\home\dvb\sw\ffmpeg-20190707-98b122c-win32-static.zip\ffmpeg-20190707-98b122c-win32-static\bin\ffmpeg.exe -> "c:\Program Files\DVBViewer"
       - Copy Plugins -> "c:\Program Files\DVBViewer\Plugins"
       - Copy Logos -> "c:\Program Files\DVBViewer\Images\Logos"
       - Copy z:\home\dvb\sw\channels.dat -> c:\ProgramData\CMUV\DVBViewer
       - Copy XML config files -> c:\ProgramData\CMUV\DVBViewer\Config
       
       
      Configure Recording Service wine "c:\Program Files\DVBViewer\svcoptions.exe"  - Recorder: Directories: Z:\mnt\recordings
         + Recordings: Disable Create NTFS filestorage data
       - Web/UPnP:
         Port 8080
         Disable: Prevent PC sleep
       
       
       
      Run As systemd service:

      /etc/systemd/system/DVBViewer.service
      [Unit] Description=Run DVBViewer Recording Service in Wine [Service] User=dvb ExecStart=/usr/bin/xvfb-run /usr/bin/wine "c:\Program Files\DVBViewer\DVBVservice.exe" [Install] WantedBy=multi-user.target
      /etc/systemd/system/DVBViewer-port.service
      [Unit] Description=Redirect port 80 to 8080 for DVBViewer Recording Service [Service] Type=oneshot ExecStart=/sbin/iptables -t nat -A PREROUTING -p tcp --dport 80 -j REDIRECT --to-ports 8080 [Install] WantedBy=multi-user.target
       
      systemctl enable DVBViewer-port.service systemctl enable DVBViewer.service systemctl start DVBViewer-port.service systemctl start DVBViewer.service  
       
      Start Wine programs as root:
       
      Totalcmd: cp /root/.Xauthority /home/dvb/ && su - dvb -c 'wine "c:\totalcmd\totalcmd.exe"' & DVBViewer Opts: systemctl stop DVBViewer && \ cp /root/.Xauthority /home/dvb/ && \ su - dvb -c 'wine "c:\Program Files\DVBViewer\svcoptions.exe"' && \ systemctl start DVBViewer
    • c.paul
      By c.paul
      Hallo,
      wollte meinen DVBViewer samt Recording-Service mal wieder updaten.
      Leider finde ich auf der Mitgliederseite dir Rubrik für den Recording-Service nicht.
      Danke für Eure Hilfe
      Grüße
      Christian
    • Patryk F
      By Patryk F
      Dear DVBViewer team,
      First of all I would like to thank You for a great software like DVBViewer is.
      I use it everyday and recommend it for every blind person which wants near fully accessible television solution.
      At this point I would also like to apologise for any potential mistakes, since it is my first post here.
      I am a bit shy in other words ;)
      I have packaged some suggestions for future development of DVBViewer.
      I assumed that putting them together would be more practical than dispersing them between apropriate threads, since they have one thing in common.
      all suggestions listed are from the visually impaired perspective, so are valid for the visually impaired interface enabled.

      1. May I ask you to reverse the old channel editor/channel scan windows separated as in V 5.X?
      It may be as an option, it does not have to be default.
      The new look of editor/scanner maybe seems more practical, but it lacks some functionalities present in the old separated scanner as well as editor.
      •  Scanner part now does not offer a "none" option when choosing a transponder list, allowing for a quick blind-scan inside DVBViewer without opening transedit. It means that you must select something from the list so doing a quick blindscan is not possible.
      • Editor has no "DiSeqc" option, so if I am correcting the setup, i cannot change the position from 7.0 to 7.1 or 7.2 for instance on the fly, during listening and satellite correction.
      I cannot also set the position to "none" if I don't want to send commands.
      2. It is not possible toread RDS when in Visually Impaired mode.
      I propose that the RDS text as well as RT and RT+ be integrated into the same read-only edit field as EPG, with a separation of 2 or 3 blank lines if both are present (as on astra 19.2 E).
      Alternatively, You may create two read-only fields between which you switch with a TAB and shift+tab key.
      3. When using visually impaired mode, the clock on a status bar (between bitrate and channel name) is irritating. May I ask for replacing it with either video bitrate (which in VI mode is available only from DVB source) or signal strength?
      4. When in VI mode, Could you please disable the auto-muting feature?
      When entering channel list editor or epg or any window of it's type, in the VI mode audio is muted, so to use epg while still listening you have to change window, press m or whatever to unmute, and proceed with an epg or whatever.
      Seems quite irritating.
      5. Since version 6.something, DVBViewer PRO presents the visually impaired mode window with the "Highlighted" text attribute.
      While it is generally helpful to read the text in this way for Low Vision users, for some reason Jaws screenreader sometimes reads unexpected things like playback time elapsed, since it is constantly changing.
      6. Last but not least, Could you please make the signal strength measure more appropriate (if a device returns it)?
      For some reason, DVBViewer pro shows the signal strength based probably on RF gain parameter, not by actual signal to noise ratio or signal link margin.
      I use two TBS products (5990 and 6903) as well as the RTL-2832 based device for DVB-t.
      While it may be problematic for 2832 to return valid Signal Strength, TBS manages to do so.
      What is more, DVBViewer GE is able to show a more intuitive signal measure.
      Thanks in advance for any feedback from You
      Patryk Faliszewski, Poland.
    • Palomino3000
      By Palomino3000
      HI,
      I have win10-64 bit and I have a big problem.
      I have done multiple installations of dvbviever.
      Program Files\DVBViewer     ----> CMUV\DVBViewer   (sat usb card)
      Program Files\DVBViewer 2   ----> CMUV\DVBViewer 2  (sat pci card)
      Program Files\DVBViewer 3   ----> CMUV\DVBViewer 3 (dvdT usb card)
      Program Files\DVBViewer 4   ----> CMUV\DVBViewer 4  (use only for iptv)
      .....
      etc etc
      .....
      Program Files\DVBViewer 8   ----> CMUV\DVBViewer 8 (use only for iptv)
      Program Files\DVBViewer 9   ----> CMUV\DVBViewer 10 (use only for iptv)
      .....
      the problem is if I launch DVBViewer 1 - 2 - 3 - 4 - 5 -6 - 7 -8 start all OK,
      then the (9) nine installation don't start!!! Even 10 and following....
      only 8 instances of dvbviwer at the same time!!!!
      why???
       
      is there a way to solve the problem?
       
      thanx!!
       
    • NetRider
      By NetRider
      Hallo,
       
      ich bin neu hier und möchte euch kurz mein Problem schildern, in der Hoffnung das Ihr mir helfen könnt.
       
      Aufgrund eines Mainboardwechsels konnte ich meine alte PCI Technisat DVB-S2 Karte nicht mehr verwenden.
       
      Ich habe mich daraufhin für die DVBSKy S950 entschieden und diese heute installiert.
       
      Gleich vorweg, ich habe den Stromanschluss an der Karte nicht angeschlosen, da der LNB komplett versorgt ist.
       
      Nach der Installation sind leider nur die öffnentlich rechtlichen ARD, ZDF usw. inkl. deren HD Versionen zu empfangen. Diese laufen sehr gut und ohne Probleme.
       
      Sobald ich VOX, ProSieben o.ä. also einen Privatsender anschalte kommt jedoch kein Bild.
       
      Kennt jemand das Problem? Einstellung falsch? Ich stehe hier gerade ein wenig auf dem Schlauch ...
       
      Vielen Dank schon mal im voraus für eure Hilfe.
       
      MfG
      Marcus
×
×
  • Create New...