keirjohnharry Posted July 7, 2016 Share Posted July 7, 2016 Hi Everyone Today I installed DVBViewer and DVBViewer Recording Service (Ver 1.3.2) , I love it but cant actually get it to work. The service opens and when I change the port it is visibly open in TCPViewer. Interestingly there are a number of DVBViewer.exe open when the service is running , assigning themselves to the correct ports , but twice , there are two instances open on every port , I cannot prevent this even when restarting the service. When I open the webpage either manually through any number of IPs or through the taskbar link , it opens the correct page and never connects , constantly loading a page , not even asking for auth details. I have tried to install it on both my HTPC and Laptop just to see if something was wrong , I turned off all firewalls etc by the way. On both of them I had the exact same issue. Here is my log , it dosent show much. 07.07.16 20:56:21.509 DVBViewer Recording Service 1.32.0.0 (beta) 07.07.16 20:56:21.509 TRecordingEngine Execute Start 07.07.16 20:56:21.510 TRecordingEngine StartService start timer 07.07.16 20:56:21.510 TRecordingEngine StartService Create plugin list 07.07.16 20:56:21.513 TRecordingEngine StartService found 0 plugins 07.07.16 20:56:21.517 TRecordingEngine StartService loadchannellist 07.07.16 20:56:21.517 TDVBDevice InitDevice No list found 07.07.16 20:56:21.517 TDVBDevice InitDevice New Devicelist 07.07.16 20:56:21.532 TRecordingEngine Start Searches load 07.07.16 20:56:21.532 TTaskList Load Tasks loaded 07.07.16 20:56:21.535 TRecordingEngine Start VCR load 07.07.16 20:56:21.535 TRecordingEngine Start EPG load 07.07.16 20:56:21.535 TRecordingEngine loadsetup load vcr 07.07.16 20:56:21.676 TRTSPWebserver Connect Could not connect 554 07.07.16 20:56:21.676 TUPnPAnnounce Start 07.07.16 20:56:21.677 TUPnPAnnounce InitWsocket 127.0.0.1 07.07.16 20:56:21.677 TUPnPAnnounce InitWsocket 192.42.42.50 07.07.16 20:56:21.681 TRecordingEngine StartService load setup 07.07.16 20:56:21.681 TRecordingEngine Recorderservice Enabled 07.07.16 20:56:21.682 TRecordingEngine Execute Stop If anyone could help it would be greatly appreciated. Many Thanks Link to comment
Griga Posted July 7, 2016 Share Posted July 7, 2016 Interestingly there are a number of DVBViewer.exe open when the service is running , assigning themselves to the correct ports , but twice , there are two instances open on every port DVBVservice.exe, not DVBViewer.exe, right? Switch Options -> Resolve Adresses off in TCPView, then you can see why. 1 Link to comment
keirjohnharry Posted July 8, 2016 Author Share Posted July 8, 2016 DVBVservice.exe, not DVBViewer.exe, right? Switch Options -> Resolve Adresses off in TCPView, then you can see why. Yes sorry it is DVBservice.exe Ah I see , so its one instance for every IP , that makes sense , still I would have thought if they are operating here then they should be viewable in a web browser on this PC or one pointing to it ? Port 9092 is my Web interface port for reference , although it dosent work if I change that to :80 or something else. Link to comment
Griga Posted July 8, 2016 Share Posted July 8, 2016 then they should be viewable in a web browser on this PC (...) Port 9092 is my Web interface port The Recording Service Web Interface should appear in a browser on the same PC after entering http://127.0.0.1:9092 as address. Link to comment
keirjohnharry Posted July 8, 2016 Author Share Posted July 8, 2016 Thats what I thought , but it dosen't. The port clearly is in use by the service , but no matter what browser on any device it cannot load the webpage. It dosent even ask for a password. If I right click the icon and open Web Interface the page endlessley loads. Link to comment
keirjohnharry Posted July 8, 2016 Author Share Posted July 8, 2016 Wow , I am so sorry I have finally worked out the problem , even though I disabled it my antivirus firewall was still running as a service and blocking dvb Link to comment
Recommended Posts