When I play this stream: https://www91.zippyshare.com/v/HpXZhE2M/file.html and try to run Teletext/Subtitle Analyzer on PID 8125 (Teletext subtitles for channel WP) - TransEdit will freeze, need to kill it.
I think this is something new, started to happen on 4.2.4, might be related to this fix, but not sure...
I've been a very happy user of DVBViewer for about 8 years now. Up until now I've been using a TechnoTrend TT-budget S2-3200 PCI card to receive satellite signals - which has been working perfectly. I'm now in a position where I need to upgrade my CPU/motherboard/RAM which means I'm going to be losing the PCI port. It doesn't seem like TechnoTrend makes PCI-E tuners, so I was looking at a TBS 6902 card but some of the reviews indicate there are problems with drivers. I was also looking at the possibility of a PCI>PCI-E converter from StarTech, which seems like a really stupid idea but may be the cheapest/safest option. I will be using DVBViewer with Windows 10 on the upgraded system, so I need a card that is proven to work as well as the TT has done. I don't think it makes a difference but I am in the UK and will only be using 28.2E satellites. I technically only need 1 tuner, but I'm not opposed to a dual/quad card. If anyone can suggest a decent solution to my problem then I'm all ears. Thanks!
Always when i play a transcodec 4K MKV H265 to WEBM stream from Dbviewer Media Web Server appear in the middle of screen a circle.
Anybody knows Is posible remove that circle and for what reason show this circle because the movie plays well?
I have problem with TransEdit v.184.108.40.206 and ATSC 8VSB WinTV-HVR 950Q tuner.
I don't see "Bandwidth" option anymore and I have error "Invalid or incomplete input".
For example, in TransEdit v220.127.116.11 I can choose "bandwidth" and no problem to add channel.
Please check attached screenshots for both versions.
I'm using Windows 10 x64.
After a lot of time requesting the Streaming button in the TransEdit tool, finally the last version 4.2.1 has it! THANK YOU! :-)
Now, I have another suggestion. If you use SAT>IP servers as your tuners, you know for sure that a lot of servers doesn't support the Full Transport streaming. Yes, almost all support "pids=all", and this it's great. However, when the TS has a high bandwidth, or it goes over a specific bitrate, in this case the resulting RTP streaming has a lot of Continuity Errors. This, isn't a problem for the internal Analyzer of the TransEdit, as the PSI tables can be readed multiple times. However, if you like to do an streaming, this can be a problem.
So, here it's my suggestion: At time, when you select with the mouse multiple pids in the Analyzer and you start the streaming (CTRL+S), then you're sending only the selected pids. And this it's great! Thank you! However, the TransEdit are in fact receving the full TS. So the filtering it's internal. But, if you include in the configuration some option, it should be possible to request to the tuner to only send the selected pids. And when the streaming stops, or some change occurs in the pid list, then update the list (and when no streaming, then restablish the "pids=all").
This will be a must have for SAT>IP servers! With this any external tool can be used for TS analysis, using the TransEdit as a TUNER.
Please, consider it.