Jump to content

TransEdit kann die DVB-S-Karte TBS 6902 nicht per unicable ansprechen


prosperus

Recommended Posts

Hallo zusammen, hat noch jemand die TBS 6902. Per DVBViewer läßt sie sich tadellos ansprechen.

In TransEdit bleibt die unicable-Einstellung ausgegraut.

 

Ein Bild kann ich wohl grad wegen eines Servererrors nicht hochladen.

Ich pack mal das TransEdit.ini rein:

 

Spoiler

[frmSettings]
cbReadLCN=0
edLCNID=0
cbScanNIT=0
cbMarkNoPAT=0
cbSkipMarked=0
cbProvider=0
cbOverwrite=0
cbDateStamp=0
cbAlwaysFECAuto=0
cbUpdateNames=1
cbReadSDTOther=0
cbBroadcastStandard=DVB
udPATTimeout=5000
udPMTTimeout=7500
udSDTTimeout=5000
udNITTimeout=15000
cbVideoDecoder=LAV Video Decoder
cbH264Decoder=LAV Video Decoder
cbHEVCDecoder=LAV Video Decoder
cbVideoRenderer=EVR Enhanced Video Renderer
cbAudioDecoder=LAV Audio Decoder
cbAC3Decoder=LAV Audio Decoder
cbAACDecoder=LAV Audio Decoder
edOutputPath=C:\Users\Administrator\Videos\
cbPIDInfo=0
cbAcceptError=0
cbHighFileSpeed=0
cbAutoRestart=1
cbCheckCRC=1
cbISO6937=0
cbUnicodeBig5=0
cbReadEIT=1
cbReadEITOther=0
cbReadExtEvent=0
cbPrivateSections=0
cbAnalyzerProto=RTP
cbAnalyzerNIC=Automatic
edAnalyzerIP=127.0.0.1
edAnalyzerPort=5018
clbNewWindow=0
cbTeletextFont=Courier New
clbTeletextCharSet=65982
cbAutoCharSet=1
cbProportionalFont=1
ClientPriority=-1
LastDPI=96
Left=325
Top=180

[frmPID]
LastDPI=96
Left=58
Top=231
CWidth=880
CHeight=458
Splitter=258
PIDStats=100,90,70,50,90,100,80,0,0
cbHex=0
ShowNodePath=0
Alpha=0

[frmScanner]
LastDPI=96
Left=112
Top=89
CWidth=783
CHeight=551
lvChannels=114,90,44,56,44,44,44,44,44,44,44,44,44
cbSortBy=Provider
rbFTA=0
rbEncrypted=0
rbBoth1=1
rbTV=0
rbRadio=0
rbBoth2=1
cbMultiAudio=1
cbVideoOnly=1
cbData=0
cbPresent=1
cbInactive=0

[frmWinMan]
LastDPI=96
Left=814
Top=0
CWidth=194
CHeight=209

[frmDiSEqCEdit]
LastDPI=96
Left=307
Top=230

[Version]
EXEVersion=4.2.4.1
IniVersion=771

[frmTransEdit]
LastDPI=96
Left=102
Top=123
CWidth=792
CHeight=435
SatSortType=0
SatSortReverse=0
lvSatellites=150,65,50
TCol0=50,72,50,0,200
TCol1=50,36,50,36,200
TCol2=50,36,0,0,286
TCol3=50,0,0,0,322
TCol4=80,60,50,0,190
TCol5=186,0,0,0,186
TCol6=186,0,0,0,186
LastNetwork=Astra 19.2°E
LastFrequency=10744
LastPolarisation=0

[Hardware]
Name.0=TBS 6902 DVBS/S2 Tuner 1
ID.0=@device:pnp:\\?\pci#ven_544d&dev_6178&subsys_00036902&rev_00#4&2a1fc852&0&0010#{71985f48-1ca1-11d3-9cc8-00c04f7971e0}\{b45b50ff-2d09-4bf2-a87c-ee4a7ef00857}
TunerType.0=1
Groups.0=255
Status.0=1
DeviceNr.0=0
DeviceType.0=1
AutoRetune.0=0
Priority.0=1
StopStreaming.0=0
StandardInterface.0=0
DVB-S2.0=1
DiSEqCCount.0=1
Vendor.0=0
AutoLNBOff.0=0
InternalNP.0=1
Name.1=TBS 6902 DVBS/S2 Tuner 0
ID.1=@device:pnp:\\?\pci#ven_544d&dev_6178&subsys_00036902&rev_00#4&2a1fc852&0&0010#{71985f48-1ca1-11d3-9cc8-00c04f7971e0}\{978d88d4-ab27-49d8-b950-d513372a3b25}
TunerType.1=1
Groups.1=255
Status.1=1
DeviceNr.1=1
DeviceType.1=1
AutoRetune.1=0
Priority.1=1
StopStreaming.1=0
StandardInterface.1=0
DVB-S2.1=1
DiSEqCCount.1=1
Vendor.1=0
AutoLNBOff.1=0
InternalNP.1=1

 

Edited by Griga
Spoiler-Tags ergänzt
Link to comment

TransEdit erkennt die Karte (noch) nicht als TBS, weil ein entsprechender Eintrag in der Hardware-Datenbank fehlt. Deshalb musst du es manuell ergänzen. Setze in der TransEdit.ini bei geschlossenem TransEdit die beiden Einträge

 

[Hardware]

Vendor.0=0

Vendor.1=0

 

auf 31. Dann funktioniert das.

 

BTW: Setup- oder sonstige Dateien mit länglichem Inhalt wie z.B. Logs bitte nicht posten, sondern als Datei anhängen oder den Inhalt zumindest in Spoiler-Tags setzen!

 

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...