Jump to content

Octopus Net unicable kein signal und Firmware update funktioniert nicht


Recommended Posts

 

Ich habe mein Octopus Net lange nicht benutzt. Ich habe ein Inverto Unicable LNB und habe im webinterface Unicable aktiviert und Inverto 24 gewählt. Aber kein Signal. Kein problem über Legacy port so Signal funktioniert nur nicht Unicable.

 

OctopusNet 1.0.70
FW Date    27 Jul 2016 19:27

Firmware ist von 2016 und nach update (Version: 15 Mar 2023 15:00) reboot (warten 5 minuten) bekomme ich


Error: 500 Internal Server Error
Sorry, the requested URL 'http://192.168.1.162/pt-conf.py/' caused an error:

Internal Server Error

Und kein antwort über telnet

Der Reset funktioniert und ich habe Update bereits zweimal versucht habe.

Untitled-1.png

Edited by boborg
Link to comment

Versuchs mal nur mit "192.168.1.162". Bzw. bist du sicher, dass die IP nach dem Update noch stimmt?

Und dann als Benutzername "admin" und Passwort "admin".

Edited by BirdOfPrey
Link to comment

also NACH dem Update von der Uraltversion hast Du wahrscheinlich V2.x drauf. Dann stimmt Dein Link überhaupt nicht mehr, da dort ein anderes Webinterface ist.

 

Probier einfach

Am 22.5.2023 um 12:07 schrieb boborg:

http://192.168.1.162

Ohne einen Pfad, oder http://192.168.1.162/login sollte auch gehen

 

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...