Transedit doesn't switch LNB's Multytenne

[styx100]

Hi,

 

Recently I connected a Technisat Skystar HD2 to my Multytenne.

DVBViewer Pro works like a charm in this configuration. Switching Between Asta 19.2, Hotbird 13, Astra 23.5 and Astra 28 is no problem at all. However Transedit does not switch between the LNB's. The POS/OPT settings are exactly the same as in DVBViewer.

What could be the problem?

[Griga]

Please attach your TransEdit.ini (see Info -> Configuration Folder in TransEdit).

[styx100]

Hi Griga,

 

Thanks for the quick reply!

Here is the ini-file. Although i tune the Astra/Eurobird 28° E (Diseqc POS B / OPT B ), the scan result are all from the Astra 1 (POS A/ OPT A).

TransEdit.ini

Edited November 9, 2008 by styx100

[Griga]

TransEdit doesn't recognize your card as Twinhan Mantis. I'll try to fix it in the next version. Change Vendor.0=0 to Vendor.0=5 in TransEdit.ini, while TransEdit is closed, which will (hopefully) make DiSEqC work.

 

Please note: Performing "Settings -> Hardware -> Detect Devices" resets the (changed) Vendor entry.

 

P.S. Additionally tick Settings -> Hardware -> DVB-S2 Device.

Edited November 9, 2008 by Griga

[styx100]

Hi Griga,

 

Changing the vendor setting did the trick. Diseqc works perfectly now.

Thanks for the great support!