DiseqC problem with versjon 4.0

[db_no]

After upgrading to versjon 4 (had versjon 3.9.4.0) i am no longer able to switch from disec input A to B.

 

I have a HVR-4000 TV card. I think i had this problem a long time ago, but if i remeber correct i had to replace a .DLL file but i cannot remember which file.

 

Thanks for all input.

[Griga]

If you are using SimpleA/SimpleB, replace it by PosA/OptA and PosB/OptA.

[db_no]

If you are using SimpleA/SimpleB, replace it by PosA/OptA and PosB/OptA.

 

It worked. Could you please explain why?

 

What is the easyest way to change the DiseqC settings for all my channels?

Edited December 26, 2008 by db_no

[Griga]

DVBViewer Pro 3.9.4 mapped SimpleA to PosA/OptA and SimpleB to PosB/OptA. DVBViewer Pro 4.0 now tries to do *real* SimpleA/B with your card (required for some old switches), revealing that your settings have been wrong ever since...

 

What is the easyest way to change the DiseqC settings for all my channels?

Channel -> Channel Editor -> Select root entry on the left side -> Select DiSEqC -> Click Update. Affects all child entries.

[db_no]

DVBViewer Pro 3.9.4 mapped SimpleA to PosA/OptA and SimpleB to PosB/OptA. DVBViewer Pro 4.0 now tries to do *real* SimpleA/B with your card (required for some old switches), revealing that your settings have been wrong ever since...

 

What is the easyest way to change the DiseqC settings for all my channels?

Channel -> Channel Editor -> Select root entry on the left side -> Select DiSEqC -> Click Update. Affects all child entries.

 

Thanks for your help. I am gratefull.