Problems with OSD

[Przemek211]

hi, if i'm using any skins downloaded from forum (also new-def 16:9) i have problem: often channels in anamorfic 16:9 not using full screen. Look here: http://img3.imageshack.us/img3/1232/beztytuumpq.jpg picture is deformed. If i'm using pre-installed skin (default) picture on all channels is ok.I change now Arcsoft codecs for MPEG2 to microsoft codec and still working. So this first problem is probably resolved

I have also second problem. This is on all skins.

Sometimes OSD isn't started. If i change channel i don't see nether panel. If i click Esc also don't start menu and not working volume changer in scroll.

i have a newest version of DVBViewer downloaded from members section. Works on Vista Home premium with all new updates. My PC conf is: P4 2,6GHz, 1GB RAM, HD2600XT on AGP. I'm using Arcsoft codecs for video (MPEG2 and h.264 with DxVA support)

Edited April 4, 2009 by Przemek211

[Przemek211]

///And third (actually second) problem. If i have a two satellites config (astra + hotbird). If i open program on hotbird and next go to astra channels, DVBV view a 15% of quality signal and not view a channel. If i close program on astra, on next open all is ok. (go from astra to hb is ok, but if again go to astra i have the same problem).

i have a skystar s2 with a newest bda driver

Edited April 4, 2009 by Przemek211

[Przemek211]

more than fifty views and no reply?

Sorry for triple post, but Edit mode is deactivated after few minutes.

And i have third (the biggest) problem. On FTA HD DVB-S(2) channels from Astra, all is good. But on hotbird only HD DVB-S FTA is ok. HD DVB-S2 is no video and audio, but signal is still ok. (beetwen 78-80% and on astra is similar) Sometimes, for approximatelly 500ms i hear sound.

i using EVR + Arcsoft (for test i install powerdvd 9)

this is most important problem for me and please help me

support.zip

Edited April 5, 2009 by Przemek211

[Przemek211]

come on..