trans edit ...send to DVBViewer

[Bill9]

i recently purchased and installed version 4.2.1.0 and after scanning and getting results there is no "Send" button to send the selected program to the viewer.

what is the procedure to have the program get to the viewer ??

[Lars_MQ]

http://www.DVBViewer.com/griga/TransEdit%2...tml#ChannelList

[Bill9]

I followed your link with no success...I will try to restate the situation....I cannot send the scan results to the DBViewer. thanks in advance

[Lars_MQ]

Yes, you restated the situation but you didn't explain.

What are you doing exactly and where does it not work?

[Bill9]

after scanning a satellite and trans edit finds channels I use the button select all and they are highlighted. I want to send these channels to DVBViewer and there is no button to click on to send these channels to the viewer.

under settings>scanner 1>I have the update channel names box checked.

when I go to DVBViewer thes channels are not there.

[starman345]

Is TransEdit in the DVBViewer root folder?

[Bill9]

it does NOT have its own folder under the Dvbviewe folder

[starman345]

it does NOT have its own folder under the Dvbviewe folder

Yes, I realize that, what I'm asking...is transedit.exe in the DVBViewer folder? And are you using a shortcut to start Transedit? If so its target should be transedit.exe in the DVBViewer folder. It sounds like you are running Transedit but it can't find DVBViewer

[Bill9]

YES..it is in the DVBViewer folder.....the target C:\programfiles\DVBViewer\transedit.exe.........transedit.exe is a 5K application with a date of 3/17/2010

[Griga]

Is the Analyze button in the TransEdit main window enabled?

[Bill9]

YES it is .....all seems fine till I try to use the add/update button........I can preview the channels ..or analyze the channels......

[Griga]

Strange. According to the program code export is enabled under the following conditions:

 

- TransEdit is part of a valid DVBViewer installation.

 

- TransEdit can access the DVBViewer channellist (requires the file UserMode.ini).

 

- Scanning is finished.

 

- The orbital position of the transponder list is set resp. not 0.0 (an attempt to scan orbital position 0.0 will be rejected with an error message anyway).

 

- Scan results are selected (applies to the Add/Update and Export button)

 

- Filter 3 -> Already Present Channels is ticked (applies to the Update All button).

[Bill9]

I have it working at about 94 per cent....it does not update if I scan the same sat and frequency on a succeeding day(S-2 transmission...I have not tried it on regular SD.

At one time my HTPC had an old version on it and it seemed to cause the problem. I deleted everything having to do with DVBViewer and started over and most every thing works.

Edited May 21, 2010 by Bill9

[Bill9]

THANKS to all who offered advice and suggestions.

 

Bill

[starman345]

Glad you got it going Bill.

[Bill9]

next thing I need to do is get the size of the screen larger while using DVBEdit.....and DVBViewer.....the TV signal is perfect in size.