jaicigy Posted October 21, 2010 Share Posted October 21, 2010 Hello, I am new to all of this and am looking for some help to be able to use fully the remote control of my Hauppauge HVR900H external USB DVB-T receiver with DVBView Pro version 4.5. and Windows 7 64 bit. Hopefully somebody can give clear indications and if needed, links to the possible files I need. Thank you very much in advance! Quote Link to comment
blasgl Posted October 21, 2010 Share Posted October 21, 2010 http://www.DVBViewer.tv/forum/topic/40480-irremoteini-und-remote-config-fur-DVBViewer/page__view__findpost__p__296776 Quote Link to comment
jaicigy Posted October 23, 2010 Author Share Posted October 23, 2010 Thank you for your reply but I have the small remote control, not the big one. Here you see it pn the box: http://www.hauppauge.com/site/press/presspictures/HVR-900-window_Spain_261.jpg Quote Link to comment
blasgl Posted October 23, 2010 Share Posted October 23, 2010 Is there an irremote.ini in your installation? If so the principle for configuration should be the same, you´ll have just less buttons. Quote Link to comment
jaicigy Posted October 23, 2010 Author Share Posted October 23, 2010 (edited) Is there an irremote.ini in your installation? If so the principle for configuration should be the same, you´ll have just less buttons. I have found the irremote.ini file in C:/Windows but how do you configure it? I have no idea.. Thank you in advance for your help Edited October 23, 2010 by jaicigy Quote Link to comment
blasgl Posted October 23, 2010 Share Posted October 23, 2010 this should be clear enough Quote Link to comment
jaicigy Posted October 24, 2010 Author Share Posted October 24, 2010 this should be clear enough I will take a loook at it and hopefully it is not too difficult to use, THANK YOU VERY MUCH!! Quote Link to comment
jaicigy Posted October 25, 2010 Author Share Posted October 25, 2010 this should be clear enough Well, I am sorry to say but I do not understand much how to program and configure a irremote.ini file or the Hauppauge.remote file to make it work fully with the small, 35 button remote control, model nr. DSR-0112, of my Hauppauge HVR900H USB Digital receiver. Maybe someone has already done it or can give me a hand. Thank you in advance! Quote Link to comment
jaicigy Posted October 28, 2010 Author Share Posted October 28, 2010 Nobody? Too bad.. I also tried Intelliremote but the software does not seem to recognise my receiver and thus cannot program each button for DVBViewer.. unless someone has a solution. Quote Link to comment
blasgl Posted October 28, 2010 Share Posted October 28, 2010 Try my irremote.ini, possibly not all key assignments work with the small remote. But if some do, you could refine the configuration. http://www.DVBViewer.tv/forum/topic/32740-how-to-use-hauppauge-wintv-nova-hd-s2-remote-with-DVBViewer/page__view__findpost__p__235959 Quote Link to comment
jaicigy Posted October 28, 2010 Author Share Posted October 28, 2010 (edited) Try my irremote.ini, possibly not all key assignments work with the small remote. But if some do, you could refine the configuration. http://www.DVBViewer.tv/forum/topic/32740-how-to-use-hauppauge-wintv-nova-hd-s2-remote-with-DVBViewer/page__view__findpost__p__235959 Thank you for your reply. I am already using your Hauppauge.zip files to use my remote but unfortunately not all buttons work such as the numbers and the Teletext. I have no idea of how to modify a irremote.ini file and with the info here on this forum it does not get any more clear to me. Hopefully someone else has the same remote, I added a picture of it, and can help me out or maybe someone can modify the irremote.ini file and the hauppauge.remote file for me so it works fully. Thanks in advance! Edited October 28, 2010 by jaicigy Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.