Problem with Diseqc extended commands , DVBserver and dvbviewer client

[dgian]

My setup:

 

A 4 port switch and a positioner afetr the 4th port.

 

Server PC with skystar HD running DVBserver as unicast server.

 

Client PC running DVBViewer as unicast clent.

 

If I choose in client PC one of the sats in the first 3 ports everything works OK, but

if I request a channel from the 4th port the positoner does not get the command.

 

 

In Server PC if I close DVBserver and I run directly DVBViewer with same setup everything works OK.

 

The command sequences for the diseqc follows:

 

 

Please help me, because I'm struggled with this technical matter.

Thank you in advance.

Edited November 14, 2010 by dgian

[McenterFreak]

I don't know if it will solve your problem, but why don't you use Recording Service instead of DVBServer?

[dgian]

To be honest I have relied for many time to dvbserver for its industrial strength, stability and

tiny footprint in a rather much complicated setup in my home so I never took a chance even to

read about recording service, let alone implementing it.

 

 

So the question remains:

 

 

Except from simple POSA/OPTA etc commands which DVBViewer transfers to dvbserver

extended commands are transfered or not?

 

Is it something I have to do or is this a bug and I have to post it to Bugs forum?

 

 

 

 

 

 

 

PS.

This is the DiSEqC.xml from DVBViewer client where you can see the interpreted commands

from the above photos.

 

<?xml version="1.0" encoding="UTF-8"?>

<settings>

<section name="Commands2">

<entry name="0090">{E0 10 38 FC} W100 [E0 31 6B 23]</entry>

<entry name="0160">[E0 10 38 FC] W100 [E0 31 6B 26]</entry>

<entry name="0282">[E0 10 38 FC] W100 [E0 31 6B 2E]</entry>

<entry name="3592">{E0 10 38 FC} W100 [E0 31 6B 01]</entry>

<entry name="3530">{E0 10 38 FC} W100 [E0 31 6B 03]</entry>

<entry name="3300">[E0 31 6B 0F] W100 {E0 10 38 FC}</entry>

</section>

</settings>

Edited November 16, 2010 by dgian

[dgian]

Just to answer to myself, it works!

 

How? The all time classic way....uninstall everything and reinstall everything!

 

 

Just an observation for those having SkyStar2 HD and the positioner menu in transedit de-activated (greyed out):

Tha same happened to me and it only came back if i chose to install "CI/remote support for technotrend".

Go figure out.

Edited November 17, 2010 by dgian

[Griga]

Tha same happened to me and it only came back if i chose to install "CI/remote support for technotrend".

Though not mentioned, it includes DiSEqC 1.2 support, requiring ttBdaDrvApi_Dll.dll. Without it only DiSEqC 1.0 works.