mokkhtar Posted February 2, 2014 Share Posted February 2, 2014 i have probleme with Transedit.v4.0.6.0 and my skystar2 pci look this pic Quote Link to comment
Derrick Posted February 2, 2014 Share Posted February 2, 2014 What is the problem? Quote Link to comment
hdv Posted February 2, 2014 Share Posted February 2, 2014 no DVBViewer in the Folder where the TransEdit exe is? more information please. Quote Link to comment
mokkhtar Posted February 3, 2014 Author Share Posted February 3, 2014 I can not update channels Because the refresh button is inactive TransEdit exe is in the folder of DVBViewer But it works with previous versions Quote Link to comment
QBox User Posted February 3, 2014 Share Posted February 3, 2014 I have the same when running TransEdit 4.x, because it's run from a separate directory. The version in DVBViewer program directory is likely 3.x, downloaded with the main program. Quote Link to comment
dantro54 Posted April 2, 2014 Share Posted April 2, 2014 Problems With TechniSat S2 in DVBViewer Pro, TranEditO/S: Win 7 x64DVBV Pro v5.2.9.0TransEdit v3.9.4.0TechniSat SkyStar S2 (WDM drivers v4.6.999)I am a Siver Surfer (61 year old Manufacturing Project Engineer). I have an on-going problem with DVBViewer Pro, TransEdit. Hoping to find a solution to my problem, I have read all of the manuals (help files) from the first word to the very last. I have read every single posting in this Forum about the very same problem I am experiencing. Nobody appears to be addressing or producing a solution to the problem.My problem is this... Every time I start TransEdit..... the "Positioner" is greyed out. It is 100% not available :-(All of the answers to postings on this Forum keep saying the the same thing... have you read the manual?.... have you checked this, that and the very obvious?These responses from the developers and supporters are not addressing or fixing the problem.In respect of the 64 bit architecture, we are all fully aware of Microsoft's failure to address the BDA interface issues. We are also all fully aware that TechniSat drivers have been designed to protect their boards from overloading/shorting/burning out because of the demands placed on them by motors which drive satellite dishes.In my case, the Microsoft issue is irrelevant. The SkyStar S2 drivers I currently have installed are the very latest TechniSat v4.6.999 WDM drivers.... they are not BDA drivers.The answers I have read in this forum to the many postings about the "Positioner Greyed Out" problem do not come even close to actually "addressing and fixing this well documented problem".Reading manuals etc are NOT the answer paying customers want to hear. We can all read manuals until the day we die but it doesn't "physically fix the problem".Two days ago I downloaded a 100% freeware program called SmartDVB. My jaw dropped when I discovered that the USALS/DiSEqC positioner/controller in this software works 100% perfectly and without any problems on my SkyStar S2 card with 64 bit drivers. Once everything was set up and all of my "Favourite" programs had been saved, my satellite dish moves immediately to every single channel I tell it to go to. That is not the case with DVBViewer Pro or TransEdit. My SkyStar S2 card is not correctly recognised in either DVBVP Pro or TransEdit.So... my question is this..... how is it possible that the lone developer of a freeware DVB program which is still in a developmental/freeware stage (v0.35) has managed to address and fix the MicroSoft/TechniSat BDA/WDM issues/problems but the developers of DVBViewer Pro payware and all of the supporters in this Forum have not been able to address or fix?Not only has the developer of SmartDVB fixed all of the known MicroSoft/TechniSat issues but he has even provided further improvements such as...1) Optimise DiSEqC for SkyStar 2 Technisat SDK.2) Try to force 18v before positioner change (useful for some cards like SkyStar 2 but do not use this if not required).To prove the point even further, I purchased a copy of Fast SatFinder to investigate if the USALS/DiSEqC posioner worked in that software. Guess what.... it works 100% perfectly.The DiSEqC/USALS positioner for Technisat SkyStar S2 with Windows 7 x64 drivers has clearly been fixed and proven to be working 100% perfectly in SmartDVB, Fast SatFinder and other softwares.When can we, as paying customers who purchased DVBViewer Pro, expect to see the same solutions being implemented?As I stated at the begining of this posting, I am a well qualified, 61 year old Project Engineer. If 10 people came to my office every week, reporting the same problem with some of the machinery we were installing.... the last thing I would do is tell them to go away and read the manuals again. I would investigate why so many people were reporting the same problem, collect the necessary data and implement a fix to resolve the issue. I hope the same happens here. Quote Link to comment
Derrick Posted April 2, 2014 Share Posted April 2, 2014 I have read all of the manuals (help files) from the first word to the very last. I have read every single posting in this Forum about the very same problem I am experiencing. no, you haven't http://www.DVBViewer.tv/forum/topic/36263-technisat-skystar-s2/?p=321235 Quote Link to comment
dantro54 Posted April 3, 2014 Share Posted April 3, 2014 Thanks for your reply Derrick but those postings are only causing more confusion. A straight answer to the problem would be VERY gratefully appreciated so can you please tell me.... 1) Are you saying that my SkyStar S2 PCI is totally unusable with DVBVP and TransEdit because of the DiSeqC 1.0/1.1/1.2 issue? 2) Can I continue using it but only if I install the SS2DiSeqC plugin (and then potentially risk burning the card)? 3) Do I need to scrap my current SkyStar S2 PCI card and buy a Skystar S2 USB instead? 4) Do I get rid of my SkyStar S2 PCI completely and buy a totally different card? Background to my problem.... I have been using DVBVP for the past 2 years. My dish was a fixed/static 60cm. The original PCI tuner card was an eBay clone but I replaced it last year with the SkyStar S2. Everything worked perfectly for static reception of UK FreeSat. Two weeks ago I decided to buy a 1.2m dish and motorise it. As you can see from my previous posting, I have had nothing but problems ever since. I've been running around in circles and spending endless hours on the Internet trying to find a solution (which annoyed my partner intensly) but everybody is providing conflicting information. Please help by providing the correct solution to the problem. Many thanks. Quote Link to comment
Derrick Posted April 3, 2014 Share Posted April 3, 2014 Your card is only certified by the manufacturer for diseqc 1.0 that's why the positioner is greyed out. I can't help you. If you find a solution, it's at your own risk. Because there is no problem with transedit, I've moved the topic to DVB Hardware. Quote Link to comment
dantro54 Posted April 3, 2014 Share Posted April 3, 2014 Many thanks for your help Derrick I will now buy a new PCI card. For DVBVP and TransEdit, should I buy a card which supports DiSeqC 1.1 or will 1.2 be OK? I took a good long look at the Technisat website. It does not say one single word anywhere that SkyStar S2 PCI cards only support DiSeqC 1.0 and are not suitable for driving dish motors. Very dishonest of them to hide that fact Quote Link to comment
serkanguzel Posted June 22, 2014 Share Posted June 22, 2014 Hi masters, Transedit 4.0.7 there is little problem. I choosing scan the channels. But I can not export to DVBViewer ? The same process; Transedit is done seamlessly with 4.0.0. Regards. Quote Link to comment
Tjod Posted June 22, 2014 Share Posted June 22, 2014 Are TransEdit.exe and DVBViewer.exe in the same folder. Quote Link to comment
serkanguzel Posted June 22, 2014 Share Posted June 22, 2014 Are TransEdit.exe and DVBViewer.exe in the same folder. Yes. Same in folder. C:\Program Files(x86)\DVBViewer Quote Link to comment
Griga Posted June 22, 2014 Share Posted June 22, 2014 Looks like TransEdit is not able to find a valid DVBViewer installation. Will be checked and (hopefully) be fixed in the next release. Quote Link to comment
serkanguzel Posted June 22, 2014 Share Posted June 22, 2014 Thank you very much for your attention. Quote Link to comment
Griga Posted June 22, 2014 Share Posted June 22, 2014 Is there something special in your installation (compared to a standard DVBViewer installation) that must be considered? Quote Link to comment
serkanguzel Posted June 22, 2014 Share Posted June 22, 2014 No. Standard installation. These way ; C:\Program Files(x86)\DVBViewer With "Transedit 4.0.0" exporting is done. But, 4.0.6 and 4.0.7 not exported. Regards. Quote Link to comment
Griga Posted June 23, 2014 Share Posted June 23, 2014 Well, I'm quite sure there must be something special, because I can't reproduce it under various circumstances, and it's not a common problem. Usually TransEdit can't export if there is no DVBViewer resp. no valid channels.dat file or no path leading to it. So ATM I don't know what to look for. Anyhow, sooner or later it will turn out Quote Link to comment
serkanguzel Posted June 23, 2014 Share Posted June 23, 2014 4.0.6 and 4.0.7 can be done with the export, the problem must be local. Come with setup, I'm cleaning channel.dat files. Always. Because; I am using satellites, by myself edit. Thank you again for your interest. 1 Quote Link to comment
azimli Posted August 4, 2014 Share Posted August 4, 2014 At member area; I could not find this version ? Quote Link to comment
Tjod Posted August 4, 2014 Share Posted August 4, 2014 Only the current versions are in the member area. TransEdit 3.9.5 and TransEdit Beta 4.0.7 Quote Link to comment
azimli Posted August 4, 2014 Share Posted August 4, 2014 (edited) Only the current versions are in the member area. TransEdit 3.9.5 and TransEdit Beta 4.0.7 Where can I find TransEdit 4.0.6.3 ? Edited August 4, 2014 by azimli Quote Link to comment
Tjod Posted August 4, 2014 Share Posted August 4, 2014 Why do you need TransEdit 4.0.6.3? What is the problem with the newer version 4.0.7? Quote Link to comment
azimli Posted August 4, 2014 Share Posted August 4, 2014 (edited) I just want to try ... For a published version; Why are you asking how to use and for what purpose!? Edited August 4, 2014 by azimli Quote Link to comment
Tjod Posted August 4, 2014 Share Posted August 4, 2014 TransEdit 4.0.6.3 is not a Version number of a official Version. Most likely that was a limited version to test a fix for one hardware. And there is no way for you to get it. If you tell us why you think you need this special version, we may be will find a solution. Quote Link to comment
azimli Posted August 4, 2014 Share Posted August 4, 2014 Scan results; "4:03, 4.0.6, 4.0.7" did not export to the DVBViewer? Quote Link to comment
Tjod Posted August 4, 2014 Share Posted August 4, 2014 Are TransEdit.exe and DVBViewer.exe in the same folder? The may reason for that to not working is that the TransEdit.exe is in the wrong folder. Quote Link to comment
azimli Posted August 4, 2014 Share Posted August 4, 2014 Is the same folder as you have written. 4.0.0 and 4.0.1 export is done. Quote Link to comment
Tjod Posted August 4, 2014 Share Posted August 4, 2014 And what about TransEdit 3.9.5 (current Version in the members section) Quote Link to comment
azimli Posted August 4, 2014 Share Posted August 4, 2014 (edited) "TransEdit 3.9.5" and also can be exported. But I want to export in the last version. ( 4.0.7 ) Edited August 4, 2014 by azimli Quote Link to comment
Tjod Posted August 4, 2014 Share Posted August 4, 2014 Then you should download TransEdit 4.0.7 over again from the members section. 3.9.5 and 4.0.7 are the same version when it comes to channel scan and exporting (compiled from the same souce). The 4.0.X version has only some additional features enabled. http://www.DVBViewer.tv/forum/topic/2745-transedit/?p=406994 I don't believe that it is working in Version 3.9.5 and not in 4.0.7. Quote Link to comment
Griga Posted August 4, 2014 Share Posted August 4, 2014 "TransEdit 3.9.5" and also can be exported. But I want to export in the last version. ( 4.0.7 ) This is an issue caused by special conditions that are not yet clarified, because I can't reproduce it. It should not happen with a regular DVBViewer installation. Will be investigated... Quote Link to comment
azimli Posted August 4, 2014 Share Posted August 4, 2014 OK. But;To scan in the final version, I'd like to see DVBViewer exports can be done. Quote Link to comment
Tjod Posted August 4, 2014 Share Posted August 4, 2014 Please post a support.zip maybe this helps to find the problem. Quote Link to comment
azimli Posted August 4, 2014 Share Posted August 4, 2014 (edited) Please post a support.zip maybe this helps to find the problem. Thanks. Edited August 4, 2014 by azimli Quote Link to comment
azimli Posted August 4, 2014 Share Posted August 4, 2014 This is an issue caused by special conditions that are not yet clarified, because I can't reproduce it. It should not happen with a regular DVBViewer installation. Will be investigated... Thanks. I'll wait Quote Link to comment
Tjod Posted August 4, 2014 Share Posted August 4, 2014 Something went wrong by you thy to attach your support.zip Quote Link to comment
azimli Posted August 6, 2014 Share Posted August 6, 2014 (edited) Please post a support.zip maybe this helps to find the problem. Dear @Tjod, Support.zip you want, logs are attached. Regards. support.zip Edited August 6, 2014 by azimli Quote Link to comment
Tjod Posted August 6, 2014 Share Posted August 6, 2014 You are using old versions. Pleas install the current DVBViewer Pro And install this TransEdit version. And then start the DVBViewer via start menu > programs > DVBViewer > Support > DVBViewer Pro (Debug Mode) and open TransEdit while the DVBViewer is ruing. Run a chennel scan and than try Add/Update in TransEdit. Stop DVBViewer and TransEdit and generate and post a new support.zip Quote Link to comment
azimli Posted August 6, 2014 Share Posted August 6, 2014 (edited) You are using old versions. Pleas install the current DVBViewer Pro And install this TransEdit version. And then start the DVBViewer via start menu > programs > DVBViewer > Support > DVBViewer Pro (Debug Mode) and open TransEdit while the DVBViewer is ruing. Run a chennel scan and than try Add/Update in TransEdit. Stop DVBViewer and TransEdit and generate and post a new support.zip Dear @Tjod, Support.zip you want, logs are attached again. Regards. new support.zip Edited August 6, 2014 by azimli Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.