Jump to content
Veritech

I need channel list pls

Recommended Posts

Veritech

Hello everyone. Im new to this forum. I started using this great app. Can someone upload last channel list pls? Also what basic plugins I need for this great app to work? Thank you.

Share this post


Link to post
Tjod

In most cases you don't need plug-ins at all.

 

And without more informations nobody can give you a fitting channel list.

What are you receive with your hardware (DVB-T, DVB-C or DVB-S). And which provider (city, cable company or sat position).

 

You can generate/update the channel list by you own.

 

TV/Radio > Scan channels

select the Reception Type

and a Transponder list with fits to you provider.

and click scan range

  • Like 1

Share this post


Link to post
Veritech

Ok. Thank you. But what are good plugins? I just cant see any info about channel like resolution and format.

Share this post


Link to post
Tjod

You can see the resolution during channel playback in different places e.g. Settings > Filters > DVB Source

2016-01-28_000546.png

 

I use the Recording Service and TransEdit frequent.

 

But it depends mostly on your use case and your needs.

Share this post


Link to post
Veritech

Thank you for your help. And which version are you using. I have some version that keeps crashing. Can you give me download link for stable version?

Share this post


Link to post
rodjd

YES on windows 10 x64 version 5.5.2 CRASH,5.3.2 is most stabile :(

Share this post


Link to post
Tjod

I'm using the current version:

https://www.DVBViewer.tv/members/

(that is the only place where you get the DVBViewer Pro(GE) after you bought it)

 

If you are using the current version. Without any Plugins and you encounter chrashes. Post a support.zip

 

PS: on Windows 10 you should check all drivers (are they up-to-date, ready for Win 10) speciously the graphic card an TV card driver.

Share this post


Link to post
Veritech

Thank you for responding so quickly. I am still using Windows 7 64. I will try 5.3.2 then. I have 5.5.2. and its crashing.

Share this post


Link to post
rodjd

Thank you for responding so quickly. I am still using Windows 7 64. I will try 5.3.2 then. I have 5.5.2. and its crashing.

with pleasure,what remote you have,is ok?

Share this post


Link to post
Veritech

I dont have remote. Im using old pinnacle dvb-s card. Soon I will have Skystar S2. Does someone have experience with this card? Is it good?

Share this post


Link to post
Veritech

Hey guys. I need more help please. Yesterday I had bought 1 lnb and also have other 2. All are different. I also have lnb multiholder for 3 lnb-s. Now is it possible that I connect hotbird, eutelsat and astra on 2 sat cards ( one is pinnacle PCTV 7010iX Dual and other will be Skystar S2 ) on two different PC-s? ( like 2 receivers ) Seller had offered me diseqc 4 in 1 out. I can use only one pc with ss s2 then. Is there diseqc 4 in and 2 out? Also I need help how to setup diseqc in DVBViewer for 13,16,19? I know this is many questions but I really need some help. Thank you.

Share this post


Link to post
Gioxy

Hi Veritech,

 

please find top useful info about DiSEqC in the DiSEqC Setting section of Transedit Manual:

Transedit use the same DVBViewer/RS concept/guide line, so better you understand directly

what you want / can do with all that hw before you try to blindly set/use it...

 

if somethings isn't enough clear, please post your question with all possible detail...

 

:bye:

Share this post


Link to post
Veritech

Thank you for your answer. I will try it. Can anyone respond me to other questions maybe? Also what is difference between Skystar S2 and HD2? Which one is better? I read that HD2 is no longer selling or something like that.

Share this post


Link to post
Veritech

Can someone export eutelsat 16 channel list and upload?

Share this post


Link to post
Gioxy

The best channel list you can have is the one you build yourself ;) and I suggest you to use TransEdit for that (you can download it in "Member section"); depends on the Scanner/Timeouts settings, but it take only between 3-8min to scan a sat position....

 

About your question "Is there diseqc 4 in and 2 out?": since every LNB have can activate only one by one their 4 "tuning section" (2 frequency bands, Low and High, and 2 polarizations, Horizontal and Vertical, so they are LV, LH, HV and HH), you can use only one receiver per LNB out, otherwise if a second receiver request a different freq/pol. it would block the first...

 

There are some solutions (your seller would have told you...):

+ single LNB with 2 out ie "twin out LNB", they can tune 1 sat position for 2 indipendent receivers (there are also for 4 and 8 out)

+ double twin LNB (2 sat pos x 2 indip. receivers)

+ LNB Quattro + Multiswitch:

- LNB Quattro, 1 sat pos. and 4 cable out, one for each LNB tuning section (...so you have to carry 4 cable for every LNB)

- Multiswitch can have 1 or more LNB Quattro for input, and 2 to 32 or more indipendent out (normally they're used to serve an entire building)

+ (maybe) SCR/unicable LNB, in witch unfortunately I haven't any experience...

 

:bye:

  • Like 1

Share this post


Link to post
Veritech

The best channel list you can have is the one you build yourself ;) and I suggest you to use TransEdit for that (you can download it in "Member section"); depends on the Scanner/Timeouts settings, but it take only between 3-8min to scan a sat position....

 

About your question "Is there diseqc 4 in and 2 out?": since every LNB have can activate only one by one their 4 "tuning section" (2 frequency bands, Low and High, and 2 polarizations, Horizontal and Vertical, so they are LV, LH, HV and HH), you can use only one receiver per LNB out, otherwise if a second receiver request a different freq/pol. it would block the first...

 

There are some solutions (your seller would have told you...):

+ single LNB with 2 out ie "twin out LNB", they can tune 1 sat position for 2 indipendent receivers (there are also for 4 and 8 out)

+ double twin LNB (2 sat pos x 2 indip. receivers)

+ LNB Quattro + Multiswitch:

- LNB Quattro, 1 sat pos. and 4 cable out, one for each LNB tuning section (...so you have to carry 4 cable for every LNB)

- Multiswitch can have 1 or more LNB Quattro for input, and 2 to 32 or more indipendent out (normally they're used to serve an entire building)

+ (maybe) SCR/unicable LNB, in witch unfortunately I haven't any experience...

 

:bye:

Thank you. Now I have clear picture :) Now I am setting 3 lnb-s for 13, 16, 19.2 . How can I find sattelite if I dont have channel list? Is there some sat finder application or something. I have list for 13 and 19.2.

Share this post


Link to post
This thread is quite old. Please consider starting a new thread rather than reviving this one.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...