tahir40 Posted June 18, 2018 Share Posted June 18, 2018 (edited) I installed the tv capture card driver, direct 9x and codecs. I can see the %89 signal. I even copied the DVBViewer program folder and CMUV folder that i have as back up but cant have video or audio since I reinstalled windows 10 pro Edited June 18, 2018 by tahir40 Quote Link to comment
tahir40 Posted June 19, 2018 Author Share Posted June 19, 2018 Any suggestions? Quote Link to comment
fxv1 Posted June 19, 2018 Share Posted June 19, 2018 check your DirectX settings --> Audio Tab. Quote Link to comment
tahir40 Posted June 19, 2018 Author Share Posted June 19, 2018 They all are lav audio decoder. I'm not having video neither. Quote Link to comment
tahir40 Posted June 19, 2018 Author Share Posted June 19, 2018 (edited) Here is the support zip support.zip Edited June 19, 2018 by tahir40 Quote Link to comment
Griga Posted June 19, 2018 Share Posted June 19, 2018 Your setup looks ok so far. However, some information is missing because you did not reproduce the problem in DVBViewer Debug Mode, as suggested here. Please also have a look at the DVBViewer Filter Property Page. What does it show? It may be a DVB device driver problem under Windows 10 1803. Some users experienced something similar after upgrading to the Windows 10 April Update. I would first try to find a more recent Prof 7301 driver (yours is more than 5 years old). If no such driver is available, I would at least try to uninstall the current driver (including deletion), reboot Windows and install it again. Quote Link to comment
Griga Posted June 19, 2018 Share Posted June 19, 2018 P.S. This may help in case of signal but no data with Prof devices under Windows 10: https://rickcaylor.websitetoolbox.com/post/prof-8000-windows-810-7740421 However, I would recommend to export the Device Parameters in RegEdit to a .reg file before deleting them, so you can restore them if necessary. Quote Link to comment
tahir40 Posted June 19, 2018 Author Share Posted June 19, 2018 (edited) I just run DVBViewer in debug mod, then closed it and recreated support zip Tv card and DVBViewer worked fine on windows 10 up to date perfectly. I just formatted and reinstalled windows 10 and before i do that I saved a back up of DVBViewer program files and CMUV folders. I just deleted Device Parameters as it's written on the last link you sent to me but then it gets everything worse, i don't even get the signal anymore, and tv card does not work at all when i try to change the tv channel or rescan the tv card on DVBViewer hardware menu. support.zip DVB Filter: Edited June 19, 2018 by tahir40 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.