Jump to content
nicis

install media server 2.1.2 erase all timers

Recommended Posts

nicis

I just updated with latest version of media server and DVBViewer. after this, when I connect again to the serveur, no more timers.

the svctimers.xml file is empty.

since I make a backup of config files, I was lucky

Is this the correct behaviour ?

 

Share this post


Link to post
nicis

I entered again all timers but those are not keeped.

even the restore does not solve the problem. xml since files are located at differents places (programmdata\cmuv, \all_users...)

 

i needed to remove dvbviewser tools, insure no files are still there and installed previous version.

every work find again.

next time, I will wait a few months before upgrading.

 

Share this post


Link to post
Griga

Dunno what you did.... I've tried the following:

 

Media Server 2.1.1 installation under Windows 10 -> Created 4 timers for different channels by using EPG page -> stopped the Media Server -> installed DVBViewer 6.1.2 and DMS 2.1.2 without uninstalling the previous version -> all timers were preserved.

 

If you uninstall the previous version and ask the uninstaller to delete all configuration files, the timers are gone, of course.

 

8 hours ago, nicis said:

even the restore does not solve the problem. xml since files are located at differents places (programmdata\cmuv, \all_users...)

 

The DMS configuration files including the svctimers.xml are located in C:\ProgramData\CMUV\DVBViewer\Config. I've never seen something stored in an "all_users" directory.

 

Share this post


Link to post
rco133

Hi nicis.

 

I have also updated from 2.1.1 to 2.1.2 and have not experienced any of the problems you are noticing.

 

All timers were kept, after the update and new timers is added and working fine.

 

What you are experiencing is defenately not supposed to happen, but seems to be something specific to your installation.

 

rco133

 

Share this post


Link to post
rco133
2 minutes ago, Griga said:

Dunno what you did.... I've tried the following:

 

Media Server 2.1.1 installation under Windows 10 -> Created 4 timers for different channels by using EPG page -> stopped the Media Server -> installed DVBViewer 6.1.2 and DMS 2.1.2 without uninstalling the previous version -> all timers were preserved.

 

If you uninstall the previous version and ask the uninstaller to delete all configuration files, the timers are gone, of course.

 

 

The DMS configuration files including the svctimers.xml are located in C:\ProgramData\CMUV\DVBViewer\Config. I've never seen something stored in an "all_users" directory.

 

 

Griga. He may be using Windows 7 Like I do. In Windos 7 the files are stored in c:\Users\All Users\CMUV\DVBViewer\Config\

 

rco133

 

Share this post


Link to post
Griga
28 minutes ago, rco133 said:

In Windos 7 the files are stored in c:\Users\All Users\CMUV\DVBViewer\Config\ 

 

Seems to be the same as C:\ProgramData\CMUV\DVBViewer\config. I get this path under Windows 7 by opening the DMS options -> click Configuration Folder (opens an Explorer window):

 

Zwischenablage01.png

 

If I copy your All Users path to the address bar the Explorer shows the same directoy :

 

Zwischenablage02.png

 

However, if I click the All Users parent directory in the address bar, I don't get there, but to the ProgramData directory.

 

So I guess All Users doesn't really exist, but is mapped to ProgramData for compatibility reasons. This internal mapping / renaming of directories performed by Windows can be pretty confusing :wacko:

 

Share this post


Link to post
HaraldL

"All Users" in C:\Users is not a folder but a symbolic link to C:\ProgramData. Try in a CMD-Window:

cd \Users
dir /a

and you get something like this:

 

21.02.2016  12:51    <DIR>          .
21.02.2016  12:51    <DIR>          ..
03.07.2017  20:06    <DIR>          Admin
29.12.2017  13:38    <DIR>          Administrator
14.07.2009  07:08    <SYMLINKD>     All Users [C:\ProgramData]
09.07.2017  19:44    <DIR>          Default
14.07.2009  07:08    <VERBINDUNG>   Default User [C:\Users\Default]
14.07.2009  06:54               174 desktop.ini

You see that "All Users" and "Default User" are not <DIR> but special entries (here german version) with their targets in Bracket, only needed for old programs who don't know about C:\ProgramData and expect the files hardcoded in C:\Users\All Users from WinXP-Syntax.

Edited by HaraldL
  • Like 1

Share this post


Link to post
nicis

hello,

thanks for the responses

I'm running windows 2008 R2 server , this is the first difference

As you say, the directory is a symbolic link, I never see this. so , this should not be a problem

 

I created the timers manually from timer page, not from the EPG page , this is a difference with your test

strange behaviour since even when I restaured the C:\ProgramData\CMUV\DVBViewer\Config\svctimers.xml file from a backup and restarted the service did not solve the problem

 

when, i believe that the installation was strange and should work as you say.

this week-end, i will try again one update, this will not take to much time.

again, thanks for your feedbacks

 

Share this post


Link to post
HaraldL
vor 14 Stunden schrieb nicis:

even when I restaured the C:\ProgramData\CMUV\DVBViewer\Config\svctimers.xml file from a backup and restarted the service did not solve the problem

 

First you must stop the service, then replace the file and then restart the service. If you replace the file while the service is running it will get overwritten when you stop/restart the service.

Share this post


Link to post
nicis

I made the test again

I updated the software

I stopped the windows service

I exit the dvbview control app from systray

i replace the C:\ProgramData\CMUV\DVBViewer\Config\svctimers.xml

i restarted windows server and control app

I checked again the svctimers.xml : is contents is still OK

I connect to DVBViewer service via web interface : the list of timer displayed in timer tab is empty (but the file is not)

 

I stopped the service again, exit the systray control app and checked the svctimers.xml file : it is empty (just tag, no "<Timer>" entries)

 

does the ID field value is important? what is his value related to ?

Share this post


Link to post
Griga

Maybe there is something wrong with your svctimers.xml. Please attach it here, or if you don't want to make it public, send me a PM.

 

Share this post


Link to post
nicis

hi,

I sended you an mail sept , 8. did you receive it ? I get no news

 

I made again the test and the problem I reported occurs on each test I made and does not occurs with previous version.

 

 

Share this post


Link to post
Griga
9 hours ago, nicis said:

I sended you an mail sept , 8. did you receive it ?

 

You can't because I have no public mail address. Rather use a personal forum message (PM).

Share this post


Link to post
Griga

I've received your svctimers.xml. Here are some points resulting from my researches:

  • I can't reproduce the issue here. Your XMLis loaded, saved and reloaded after a DMS stop/start without becoming empty. However, since I don't have the associated TS Stream channel in my list, the DMS changes the channel to another one (first best match) during this process.
  • I've tried the procedure described by you with other TS Stream channels, but all resulting timers where preserved on a DMS stop/restart.
  • While checking your file I found (minor) bugs in the timer handling, but none that causes a timer to be dropped. One of the bugs lets the timer for a TS Stream channel appear in red in the web interface timer list, marked as "non executable". This happens if there is no TS Stream device in the hardware list, because the functions that checks the executability of timers doesn't consider that TS Stream devices are auto-created on demand (adding a TS Stream device to the hardware list fixes it). However, that's only an optical UI thing. The timer is executed anyway.
  • The DMS uselessly saves the svctimers.xml right after it has been loaded, but that doesn't cause the issue here either. I guess the timer is dropped on loading for some reason that I can't see. The DMS would regard a times as invalid and drop it on loading
    • if no date is assigned to it, but your timer has a valid date.
    • if the timer is only executed once and the end time is already in the past. But your timer is auto-repeating and executed more than once.
    • if no channel from the channel list can be assigned to it. But the channel of your timer obviously is in your list.

So I still don't know why it happens in your installation. Since you didn't provide a support.zip yet, there is nothing more that I can check.

 

Share this post


Link to post
nicis

I make a test under windows 10 pro and same error.

I looked to your support tools but it is related to problems with DVBViewer  (according instruction, I need to start DVBViewer in debug mode

does using it and his logs will help you since my problem is related to the scheduling withing the media server not the "DVBViewer" player

is it possible to trace the "cleaning action" the dms does when loading the xml file. this will help to debug the reason why all entries are removed even when the entries are OK

 

Share this post


Link to post
nicis

some more infos :

 

Do you deal correctly timestamp when using different regional format ?
perhpas the dms is very dependant of times values. how do you test is a timestamp if valid or not.

for example here are the html code when you display  the "timer"

as you can see, timestamp are not normalized. Strange to see that you display AM/PM format while the regional parameter wihin windows is 24h format


also, under windows 10, i launch the web interface and made a change. I changed start time 01:58 to 14:58

when I check the file in C:\ProgramData\CMUV\DVBViewer\Config\svctimers.xml, the windows file modification time is still dated before the change and his content is still the old time : 01:58

when I refresh the web page (F5) or exit and enter again web interface, still displayed 01:58

I stop the service, the timer in the file is now updated to 14h58

when I start the service again :  the file is empty (no timer) but the svctimers.bak is ok, the timer is within with 14:58

------------------------------------------------------------------------------------------------------------------

on the windows 2008 R2, a timer is displayed on the web interface as :

------------------------------------------------------------------------------------------------------------------

<thead><tr><th colspan="4" class="mpointer">mardi, 25/09/2018</th></tr></thead><tbody>
    <tr class="activated  dofade">
    <td style="width:30px;" align="center"><span class="active deactivate mpointer" aurl="timer_list.html?aktion=timer_activate&id=0&active=0&sortby=date" title="Timer enabled | Web"></span></td>
    <td style="width:14em;">2347 xxxx</td>
    <td style="width:7em;padding-left:5px;">01:58 - 06:16</td>
    <td><div class="icons2">  
        <img src="gfx/repeat2.png" alt="Weekly Reruns" width="18" height="19">
        <a href="timer_new.html?aktion=timer_new&referer=timer_list.html?aktion=timer_list&id=0&timertype=0&sortby=date" class="fader edit" title="Edit Timer"><img src="gfx/btn_edit.png" height="17" width="17" alt="Edit Timer">&nbsp;</a><img class="fader mpointer delete" src="gfx/btn_delete.png" delurl="0" alt="Delete" title="Delete">
        <input type="checkbox" name="id" value="0">
    </div>
        <span class="aentry">2347 xxxx</span>
    </td>
</tr>
</tbody>

------------------------------------------------------------------------------------------------------------------

on the windows 10 , the same timer is displayed on the web interface as :

------------------------------------------------------------------------------------------------------------------

<thead><tr><th colspan="4" class="mpointer">Tuesday, 9/25/2018</th></tr></thead><tbody>
    <tr class="activated  dofade">
    <td style="width:30px;" align="center"><span class="active deactivate mpointer" aurl="timer_list.html?aktion=timer_activate&id=0&active=0&sortby=date" title="Timer enabled | Web"></span></td>
    <td style="width:14em;">2347 xxxx</td>
    <td style="width:7em;padding-left:5px;">1:58 AM - 6:16 AM</td>
    <td><div class="icons2">  
        <img src="gfx/repeat2.png" alt="Weekly Reruns" width="18" height="19">
        <a href="timer_new.html?aktion=timer_new&referer=timer_list.html?aktion=timer_list&id=0&timertype=0&sortby=date" class="fader edit" title="Edit Timer"><img src="gfx/btn_edit.png" height="17" width="17" alt="Edit Timer">&nbsp;</a><img class="fader mpointer delete" src="gfx/btn_delete.png" delurl="0" alt="Delete" title="Delete">
        <input type="checkbox" name="id" value="0">
    </div>
        <span class="aentry">2347 xxxx</span>
    </td>
</tr>
</tbody>

 

 

Share this post


Link to post
Griga
6 hours ago, nicis said:

I looked to your support tools but it is related to problems with DVBViewer 

 

That's simply wrong. Please read more carefully.

 

6 hours ago, nicis said:

Strange to see that you display AM/PM format while the regional parameter wihin windows is 24h format

 

The DMS uses the format according to the Windows regional settings. If you don't get the expected display your Windows configuration may be faulty. There is a known problem with some Windows OEM versions that are pre-configured for a certain region. A region change on installation or initial setup causes inconsistent registry entries. This can usually be fixed by first changing the region to another country (click Apply), then back to the intended country (again click Apply) and finally restarting the DMS.

 

6 hours ago, nicis said:

also, under windows 10, i launch the web interface and made a change. I changed start time 01:58 to 14:58

when I check the file in C:\ProgramData\CMUV\DVBViewer\Config\svctimers.xml, the windows file modification time is still dated before the change and his content is still the old time : 01:58

 

Here the "last modified" time of the svctimers.xml changes.

 

I'm quite sure the problem is caused by your configuration, because if it was a general DMS problem there would be lots of similar reports in the forum. But there aren't, neither from countries that are using the AM/PM format, nor from countries that are not using it. You are the only one.

 

Share this post


Link to post
nicis

Ok , i understand that my configuration is perhaps strange

this was a fresh windows 10 installation , no other configuration or tools installed, the windows was an english version, I just changed the keyboard to french and the date/time fromat to french, that all .

 

I just make a final test : put every thing in US format, 24h , ... no change

 

neve mind, I will not spend more time about this behaviour

 

just to finish : strange that this does not occurs with the versions 2.1.0.0 and  6.1.0.0 of those tools but just the latest one.

strange no ?

 

when I remove the version, delete all directories & files, reboot and install latest version -> bug

when I remove the version, delete all directories & files, reboot and install previous version -> every work fine

 

If I execute 100 times those 2 statements (install old and new ), I will be reproduct 100 times the errors on 2 different computers.

 

My professionnal position is now IT manager and I started developpement 36 years ago and I still develop tools,

I'm  sure this is not the computer but the way the software works. this version is more sensitive to something

 

 

.

Share this post


Link to post
nicis

one latest test

 

i installed a completly new windows from windows 7 French DVD on a the computer
after this, the only change I made is install chipset drivers and network drivers, disable the firewall
I even did not need to change time zone, date/time format, ...

always default options has been used.
i also installed chrome FR and firefox FR in order to check with different browser ( IE 8 is not supported correctly).
all is default. no antivirus, no other tools except yours

I installed DVBViewer and media server-> and test with all 3 browser : ie/firefox/chrome :

i was able to view a channel, so the installation look's ok.


I create a timer and there is no AM/PM displayed. the time is correctly display as HH:MM (24)

- when I stop the service and start it again via  DVBVCtrl : when I lauch a browser : unable to connect to localhost:8089
- I stop it again and start it again via DVBVCtrl : able to connect to localhost:8089

ok, this is another problem I already found before.


the result : the timer is not found any more. the svctimers file is empty but not the .bak

the file is erased when the service start.

 

so, here , nobody can say this is a strange configuration.

Share this post


Link to post
Griga
On 9/16/2018 at 11:05 AM, Griga said:

Since you didn't provide a support.zip yet, there is nothing more that I can check.

 

Looks like we are entering an infinite loop... :rolleyes: There are two things that I want to do:

  • Check the svcdebug.log for errors
  • Copy your DMS settings to my PC and see if I can reproduce the issue.

BTW: I've tried to change the date format used by the DMS to French habits (DD/MM/YYYY instead of the German DD.MM.YYY) in order to check what it does. It wasn't that easy... changing the country on Control Panel -> Region and Language -> Format to France had no effect, because it is applied to the current user account (DVBViewer responds to it quite happily). However, the DMS as Windows service is running in the system account. So how can one change its date format? It took me some time to find out (under Windows 7) that I have to go to the Control Panel -> Region and Language -> Administrative tab in order to copy the the current user account settings to the system account, thus making them the default settings for my PC.

 

Nevertheless all timers are preserved on DMS stop/start, no matter what I do...

 

Share this post


Link to post
nicis

i will provide support.zip file but in the svcdebug.log file, no error

 

Spoiler

22.09.18 01:21:49.622 Start App            ------------------------------------------------------------
22.09.18 01:21:49.622 DVBViewer Media Server 2.1.2.0
22.09.18 01:21:49.622 TServiceMain         Execute          Start
22.09.18 01:21:49.623 TServiceMain         StartService     start timer
22.09.18 01:21:49.623 TServiceMain         StartService     Create plugin list
22.09.18 01:21:49.623 TServiceMain         StartService     found 0 plugins
22.09.18 01:21:49.638 TServiceMain         StartService     loadchannellist
22.09.18 01:21:49.638 TDVBDevice           InitDevice       No list found
22.09.18 01:21:49.638 TDVBDevice           InitDevice       New Devicelist
22.09.18 01:21:49.643 TServiceMain         Start            Searches load
22.09.18 01:21:49.643 TTaskList            LoadDoc          default\config\tasks.xml loaded
22.09.18 01:21:49.644 TServiceMain         Start            VCR load
22.09.18 01:21:49.644 TServiceMain         Start            EPG load
22.09.18 01:21:49.644 TServiceMain         NextEPGUpdate    22/09/2018 01:26:49
22.09.18 01:21:49.644 TServiceMain         loadsetup        load vcr
22.09.18 01:21:49.670 TUPnPAnnounce        Start            
22.09.18 01:21:49.670 TUPnPAnnounce        InitWsocket      127.0.0.1
22.09.18 01:21:49.670 TUPnPAnnounce        InitWsocket      192.168.10.234
22.09.18 01:21:49.672 TServiceMain         StartService     load setup
22.09.18 01:21:49.672 TServiceMain         Service          Enabled
22.09.18 01:24:06.269 TServiceMain         StopService      start stopping service
22.09.18 01:24:06.269 TUPnPAnnounce        Stopped          
22.09.18 01:24:06.270 TDVBWebserver        Disconnected     
22.09.18 01:24:06.270 TStreamManager       Deactivated      
22.09.18 01:24:06.270 TUPnPDevice          Stopped          
22.09.18 01:24:06.270 TRecordManager       Freed            
22.09.18 01:24:06.280 TSynHttpServer       ServerLoop       terminated
22.09.18 01:24:06.283 TSrvDataModule       Freed            
22.09.18 01:24:06.284 TRTSPWebserver       Disconnected     
22.09.18 01:24:06.285 TServiceMain         SaveSetup        finished
22.09.18 01:24:06.285 TServiceMain         Stop             ClearDeviceList
22.09.18 01:24:06.285 TServiceMain         Stop             Done ClearDeviceList
22.09.18 01:24:06.286 TServiceMain         Stop             Unload settings
22.09.18 01:24:06.286 TServiceMain         Stop             Couninitialize
22.09.18 01:24:06.287 TServiceMain         Service          Disabled
22.09.18 01:24:06.287 TServiceMain         StopService      stop service
22.09.18 01:24:06.287 TServiceMain         Execute          setrunning false
22.09.18 01:24:06.287 TServiceMain         Execute          release shared
22.09.18 01:24:06.287 TServiceMain         Execute          Couninitialize
22.09.18 01:24:06.287 TServiceMain         Execute          Stop
22.09.18 01:24:06.287 End App              ------------------------------------------------------------
22.09.18 01:24:07.475 Start App            ------------------------------------------------------------
22.09.18 01:24:07.476 DVBViewer Media Server 2.1.2.0
22.09.18 01:24:07.476 TServiceMain         Execute          Start
22.09.18 01:24:07.476 TServiceMain         StartService     start timer
22.09.18 01:24:07.476 TServiceMain         StartService     Create plugin list
22.09.18 01:24:07.476 TServiceMain         StartService     found 0 plugins
22.09.18 01:24:07.499 TServiceMain         StartService     loadchannellist
22.09.18 01:24:07.500 TDVBDevice           InitDevice       TS Stream Device
22.09.18 01:24:07.502 TServiceMain         Start            Searches load
22.09.18 01:24:07.502 TTaskList            LoadDoc          default\config\tasks.xml loaded
22.09.18 01:24:07.503 TServiceMain         Start            VCR load
22.09.18 01:24:07.503 TServiceMain         Start            EPG load
22.09.18 01:24:07.503 TServiceMain         loadsetup        load vcr
22.09.18 01:24:07.516 TUPnPDevice          Start            
22.09.18 01:24:07.516 TUPnPAnnounce        Start            
22.09.18 01:24:07.516 TUPnPAnnounce        InitWsocket      127.0.0.1
22.09.18 01:24:07.516 TUPnPAnnounce        InitWsocket      192.168.10.234
22.09.18 01:24:07.518 TServiceMain         StartService     load setup
22.09.18 01:24:07.518 TServiceMain         Service          Enabled
22.09.18 01:25:52.544 TServiceMain         StopService      start stopping service
22.09.18 01:25:52.544 TUPnPAnnounce        Stopped          
22.09.18 01:25:52.544 TDVBWebserver        Disconnected     
22.09.18 01:25:52.544 TStreamManager       Deactivated      
22.09.18 01:25:52.669 TUPnPDevice          Stopped          
22.09.18 01:25:52.669 TRecordManager       Freed            
22.09.18 01:25:52.763 TSynHttpServer       ServerLoop       terminated
22.09.18 01:25:52.778 TSrvDataModule       Freed            
22.09.18 01:25:52.778 TRTSPWebserver       Disconnected     
22.09.18 01:25:52.778 TServiceMain         SaveSetup        finished
22.09.18 01:25:52.778 TServiceMain         Stop             ClearDeviceList
22.09.18 01:25:52.778 TServiceMain         Stop             Done ClearDeviceList
22.09.18 01:25:52.778 TServiceMain         Stop             Unload settings
22.09.18 01:25:52.778 TServiceMain         Stop             Couninitialize
22.09.18 01:25:52.778 TServiceMain         Service          Disabled
22.09.18 01:25:52.778 TServiceMain         StopService      stop service
22.09.18 01:25:52.778 TServiceMain         Execute          setrunning false
22.09.18 01:25:52.778 TServiceMain         Execute          release shared
22.09.18 01:25:52.778 TServiceMain         Execute          Couninitialize
22.09.18 01:25:52.778 TServiceMain         Execute          Stop
22.09.18 01:25:52.778 End App              ------------------------------------------------------------
22.09.18 01:25:58.472 Start App            ------------------------------------------------------------
22.09.18 01:25:58.472 DVBViewer Media Server 2.1.2.0
22.09.18 01:25:58.472 TServiceMain         Execute          Start
22.09.18 01:25:58.472 TServiceMain         StartService     start timer
22.09.18 01:25:58.472 TServiceMain         StartService     Create plugin list
22.09.18 01:25:58.472 TServiceMain         StartService     found 0 plugins
22.09.18 01:25:58.488 TServiceMain         StartService     loadchannellist
22.09.18 01:25:58.488 TDVBDevice           InitDevice       TS Stream Device
22.09.18 01:25:58.488 TServiceMain         Start            Searches load
22.09.18 01:25:58.488 TTaskList            LoadDoc          default\config\tasks.xml loaded
22.09.18 01:25:58.488 TServiceMain         Execute          Stop
22.09.18 01:26:11.852 End App              ------------------------------------------------------------
22.09.18 01:26:16.477 Start App            ------------------------------------------------------------
22.09.18 01:26:16.477 DVBViewer Media Server 2.1.2.0
22.09.18 01:26:16.477 TServiceMain         Execute          Start
22.09.18 01:26:16.478 TServiceMain         StartService     start timer
22.09.18 01:26:16.478 TServiceMain         StartService     Create plugin list
22.09.18 01:26:16.478 TServiceMain         StartService     found 0 plugins
22.09.18 01:26:16.493 TServiceMain         StartService     loadchannellist
22.09.18 01:26:16.494 TDVBDevice           InitDevice       TS Stream Device
22.09.18 01:26:16.495 TServiceMain         Start            Searches load
22.09.18 01:26:16.495 TTaskList            LoadDoc          default\config\tasks.xml loaded
22.09.18 01:26:16.496 TServiceMain         Start            VCR load
22.09.18 01:26:16.496 TServiceMain         Start            EPG load
22.09.18 01:26:16.496 TServiceMain         loadsetup        load vcr
22.09.18 01:26:16.509 TUPnPDevice          Start            
22.09.18 01:26:16.510 TUPnPAnnounce        Start            
22.09.18 01:26:16.510 TUPnPAnnounce        InitWsocket      127.0.0.1
22.09.18 01:26:16.510 TUPnPAnnounce        InitWsocket      192.168.10.234
22.09.18 01:26:16.513 TServiceMain         StartService     load setup
22.09.18 01:26:16.513 TServiceMain         Service          Enabled
22.09.18 01:38:02.676 TServiceMain         StopService      start stopping service
22.09.18 01:38:02.677 TUPnPAnnounce        Stopped          
22.09.18 01:38:02.678 TDVBWebserver        Disconnected     
22.09.18 01:38:02.678 TStreamManager       Deactivated      
22.09.18 01:38:02.711 TUPnPDevice          Stopped          
22.09.18 01:38:02.711 TRecordManager       Freed            
22.09.18 01:38:02.906 TSynHttpServer       ServerLoop       terminated
22.09.18 01:38:02.908 TSrvDataModule       Freed            
22.09.18 01:38:02.908 TRTSPWebserver       Disconnected     
22.09.18 01:38:02.909 TServiceMain         SaveSetup        finished
22.09.18 01:38:02.910 TServiceMain         Stop             ClearDeviceList
22.09.18 01:38:02.910 TServiceMain         Stop             Done ClearDeviceList
22.09.18 01:38:02.910 TServiceMain         Stop             Unload settings
22.09.18 01:38:02.910 TServiceMain         Stop             Couninitialize
22.09.18 01:38:02.911 TServiceMain         Service          Disabled
22.09.18 01:38:02.911 TServiceMain         StopService      stop service
22.09.18 01:38:02.911 TServiceMain         Execute          setrunning false
22.09.18 01:38:02.911 TServiceMain         Execute          release shared
22.09.18 01:38:02.911 TServiceMain         Execute          Couninitialize
22.09.18 01:38:02.911 TServiceMain         Execute          Stop
22.09.18 01:38:02.912 End App              ------------------------------------------------------------
22.09.18 01:38:07.018 Start App            ------------------------------------------------------------
22.09.18 01:38:07.019 DVBViewer Media Server 2.1.2.0
22.09.18 01:38:07.019 TServiceMain         Execute          Start
22.09.18 01:38:07.019 TServiceMain         StartService     start timer
22.09.18 01:38:07.019 TServiceMain         StartService     Create plugin list
22.09.18 01:38:07.019 TServiceMain         StartService     found 0 plugins
22.09.18 01:38:07.043 TServiceMain         StartService     loadchannellist
22.09.18 01:38:07.044 TDVBDevice           InitDevice       TS Stream Device
22.09.18 01:38:07.046 TServiceMain         Start            Searches load
22.09.18 01:38:07.046 TTaskList            LoadDoc          default\config\tasks.xml loaded
22.09.18 01:38:07.048 TServiceMain         Execute          Stop
22.09.18 01:39:29.086 End App              ------------------------------------------------------------
22.09.18 01:39:31.856 Start App            ------------------------------------------------------------
22.09.18 01:39:31.856 DVBViewer Media Server 2.1.2.0
22.09.18 01:39:31.856 TServiceMain         Execute          Start
22.09.18 01:39:31.857 TServiceMain         StartService     start timer
22.09.18 01:39:31.857 TServiceMain         StartService     Create plugin list
22.09.18 01:39:31.857 TServiceMain         StartService     found 0 plugins
22.09.18 01:39:31.877 TServiceMain         StartService     loadchannellist
22.09.18 01:39:31.877 TDVBDevice           InitDevice       TS Stream Device
22.09.18 01:39:31.878 TServiceMain         Start            Searches load
22.09.18 01:39:31.879 TTaskList            LoadDoc          default\config\tasks.xml loaded
22.09.18 01:39:31.880 TServiceMain         Start            VCR load
22.09.18 01:39:31.880 TServiceMain         Start            EPG load
22.09.18 01:39:31.880 TServiceMain         loadsetup        load vcr
22.09.18 01:39:31.895 TUPnPDevice          Start            
22.09.18 01:39:31.895 TUPnPAnnounce        Start            
22.09.18 01:39:31.895 TUPnPAnnounce        InitWsocket      127.0.0.1
22.09.18 01:39:31.895 TUPnPAnnounce        InitWsocket      192.168.10.234
22.09.18 01:39:31.897 TServiceMain         StartService     load setup
22.09.18 01:39:31.897 TServiceMain         Service          Enabled
22.09.18 20:51:48.700 TServiceMain         StopService      start stopping service
22.09.18 20:51:48.701 TUPnPAnnounce        Stopped          
22.09.18 20:51:48.701 TDVBWebserver        Disconnected     
22.09.18 20:51:48.702 TStreamManager       Deactivated      
22.09.18 20:51:48.735 TUPnPDevice          Stopped          
22.09.18 20:51:48.735 TRecordManager       Freed            
22.09.18 20:51:48.799 TSynHttpServer       ServerLoop       terminated
22.09.18 20:51:48.801 TSrvDataModule       Freed            
22.09.18 20:51:48.801 TRTSPWebserver       Disconnected     
22.09.18 20:51:48.802 TServiceMain         SaveSetup        finished
22.09.18 20:51:48.803 TServiceMain         Stop             ClearDeviceList
22.09.18 20:51:48.803 TServiceMain         Stop             Done ClearDeviceList
22.09.18 20:51:48.803 TServiceMain         Stop             Unload settings
22.09.18 20:51:48.803 TServiceMain         Stop             Couninitialize
22.09.18 20:51:48.804 TServiceMain         Service          Disabled
22.09.18 20:51:48.804 TServiceMain         StopService      stop service
22.09.18 20:51:48.804 TServiceMain         Execute          setrunning false
22.09.18 20:51:48.804 TServiceMain         Execute          release shared
22.09.18 20:51:48.804 TServiceMain         Execute          Couninitialize
22.09.18 20:51:48.804 TServiceMain         Execute          Stop
22.09.18 20:51:48.805 End App              ------------------------------------------------------------
22.09.18 20:51:52.946 Start App            ------------------------------------------------------------
22.09.18 20:51:52.947 DVBViewer Media Server 2.1.2.0
22.09.18 20:51:52.947 TServiceMain         Execute          Start
22.09.18 20:51:52.947 TServiceMain         StartService     start timer
22.09.18 20:51:52.948 TServiceMain         StartService     Create plugin list
22.09.18 20:51:52.948 TServiceMain         StartService     found 0 plugins
22.09.18 20:51:52.962 TServiceMain         StartService     loadchannellist
22.09.18 20:51:52.963 TDVBDevice           InitDevice       TS Stream Device
22.09.18 20:51:52.964 TServiceMain         Start            Searches load
22.09.18 20:51:52.964 TTaskList            LoadDoc          default\config\tasks.xml loaded
22.09.18 20:51:52.965 TServiceMain         Start            VCR load
22.09.18 20:51:52.965 TServiceMain         Start            EPG load
22.09.18 20:51:52.965 TServiceMain         loadsetup        load vcr
22.09.18 20:51:52.978 TUPnPDevice          Start            
22.09.18 20:51:52.978 TUPnPAnnounce        Start            
22.09.18 20:51:52.978 TUPnPAnnounce        InitWsocket      127.0.0.1
22.09.18 20:51:52.978 TUPnPAnnounce        InitWsocket      192.168.10.234
22.09.18 20:51:52.980 TServiceMain         StartService     load setup
22.09.18 20:51:52.980 TServiceMain         Service          Enabled
22.09.18 20:52:32.334 TServiceMain         StopService      start stopping service
22.09.18 20:52:32.335 TUPnPAnnounce        Stopped          
22.09.18 20:52:32.335 TDVBWebserver        Disconnected     
22.09.18 20:52:32.335 TStreamManager       Deactivated      
22.09.18 20:52:32.348 TUPnPDevice          Stopped          
22.09.18 20:52:32.348 TRecordManager       Freed            
22.09.18 20:52:32.379 TSynHttpServer       ServerLoop       terminated
22.09.18 20:52:32.381 TSrvDataModule       Freed            
22.09.18 20:52:32.381 TRTSPWebserver       Disconnected     
22.09.18 20:52:32.382 TServiceMain         SaveSetup        finished
22.09.18 20:52:32.383 TServiceMain         Stop             ClearDeviceList
22.09.18 20:52:32.383 TServiceMain         Stop             Done ClearDeviceList
22.09.18 20:52:32.383 TServiceMain         Stop             Unload settings
22.09.18 20:52:32.383 TServiceMain         Stop             Couninitialize
22.09.18 20:52:32.384 TServiceMain         Service          Disabled
22.09.18 20:52:32.384 TServiceMain         StopService      stop service
22.09.18 20:52:32.384 TServiceMain         Execute          setrunning false
22.09.18 20:52:32.384 TServiceMain         Execute          release shared
22.09.18 20:52:32.384 TServiceMain         Execute          Couninitialize
22.09.18 20:52:32.385 TServiceMain         Execute          Stop
22.09.18 20:52:32.385 End App              ------------------------------------------------------------
22.09.18 20:52:36.089 Start App            ------------------------------------------------------------
22.09.18 20:52:36.090 DVBViewer Media Server 2.1.2.0
22.09.18 20:52:36.090 TServiceMain         Execute          Start
22.09.18 20:52:36.090 TServiceMain         StartService     start timer
22.09.18 20:52:36.090 TServiceMain         StartService     Create plugin list
22.09.18 20:52:36.091 TServiceMain         StartService     found 0 plugins
22.09.18 20:52:36.105 TServiceMain         StartService     loadchannellist
22.09.18 20:52:36.105 TDVBDevice           InitDevice       TS Stream Device
22.09.18 20:52:36.106 TServiceMain         Start            Searches load
22.09.18 20:52:36.107 TTaskList            LoadDoc          default\config\tasks.xml loaded
22.09.18 20:52:36.108 TServiceMain         Execute          Stop
22.09.18 20:52:59.591 End App              ------------------------------------------------------------
22.09.18 20:53:02.405 Start App            ------------------------------------------------------------
22.09.18 20:53:02.405 DVBViewer Media Server 2.1.2.0
22.09.18 20:53:02.406 TServiceMain         Execute          Start
22.09.18 20:53:02.406 TServiceMain         StartService     start timer
22.09.18 20:53:02.406 TServiceMain         StartService     Create plugin list
22.09.18 20:53:02.406 TServiceMain         StartService     found 0 plugins
22.09.18 20:53:02.421 TServiceMain         StartService     loadchannellist
22.09.18 20:53:02.422 TDVBDevice           InitDevice       TS Stream Device
22.09.18 20:53:02.423 TServiceMain         Start            Searches load
22.09.18 20:53:02.423 TTaskList            LoadDoc          default\config\tasks.xml loaded
22.09.18 20:53:02.424 TServiceMain         Start            VCR load
22.09.18 20:53:02.424 TServiceMain         Start            EPG load
22.09.18 20:53:02.424 TServiceMain         loadsetup        load vcr
22.09.18 20:53:02.436 TUPnPDevice          Start            
22.09.18 20:53:02.436 TUPnPAnnounce        Start            
22.09.18 20:53:02.437 TUPnPAnnounce        InitWsocket      127.0.0.1
22.09.18 20:53:02.437 TUPnPAnnounce        InitWsocket      192.168.10.234
22.09.18 20:53:02.439 TServiceMain         StartService     load setup
22.09.18 20:53:02.439 TServiceMain         Service          Enabled
22.09.18 20:53:42.145 TServiceMain         StopService      start stopping service
22.09.18 20:53:42.146 TUPnPAnnounce        Stopped          
22.09.18 20:53:42.146 TDVBWebserver        Disconnected     
22.09.18 20:53:42.147 TStreamManager       Deactivated      
22.09.18 20:53:42.186 TUPnPDevice          Stopped          
22.09.18 20:53:42.186 TRecordManager       Freed            
22.09.18 20:53:42.236 TSynHttpServer       ServerLoop       terminated
22.09.18 20:53:42.238 TSrvDataModule       Freed            
22.09.18 20:53:42.238 TRTSPWebserver       Disconnected     
22.09.18 20:53:42.239 TServiceMain         SaveSetup        finished
22.09.18 20:53:42.240 TServiceMain         Stop             ClearDeviceList
22.09.18 20:53:42.240 TServiceMain         Stop             Done ClearDeviceList
22.09.18 20:53:42.240 TServiceMain         Stop             Unload settings
22.09.18 20:53:42.240 TServiceMain         Stop             Couninitialize
22.09.18 20:53:42.241 TServiceMain         Service          Disabled
22.09.18 20:53:42.241 TServiceMain         StopService      stop service
22.09.18 20:53:42.241 TServiceMain         Execute          setrunning false
22.09.18 20:53:42.241 TServiceMain         Execute          release shared
22.09.18 20:53:42.241 TServiceMain         Execute          Couninitialize
22.09.18 20:53:42.241 TServiceMain         Execute          Stop
22.09.18 20:53:42.242 End App              ------------------------------------------------------------

 

 

I make the same test with a US version of windows , same error.

 

so, you can make by yourself the same test as me : download from microsoft a trial version of windows, since it is not activated , you have 3 days to debug your program. since I dont have the source code, this will take to much time for me to debug at assembly level

Edited by Griga
Spoiler tags added

Share this post


Link to post
nicis

helllo,

 

any news ?

did you reproduce the bug ?

Share this post


Link to post
Griga

No, I can't reproduce it. You are still the only user that encounters this problem. I have no idea what is going on in your system.

Share this post


Link to post
nicis

surprise because i can reproduce the bug just installtion a freesh windows cd installation + dvbviews installation. nothing else

and this behaviour was not with the previous version.

 

desappointed , never mind

 

Share this post


Link to post
Griga

The matter seems to be solved.

 

Doing evil things with evil URLs :devil:and wanting to hide them, instead of providing important information, prevented an earlier solution. If I had seen the URL I would have been able to reproduce the issue immediately.

 

Share this post


Link to post
This thread is quite old. Please consider starting a new thread rather than reviving this one.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...