الهاوي Posted February 27 Posted February 27 (edited) Does the CAM work on the TechnoTrend Connect S2-3650 CI device... without any problems... https://image2url.com/r2/default/images/1772193484555-f7de9723-efb6-44d0-a618-4e25deb79dde.jpg https://image2url.com/r2/default/images/1772193542459-a7b02f6d-ad33-4fe6-91aa-3195f2b5bac3.jpg Edited February 27 by الهاوي Quote
Griga Posted February 27 Posted February 27 Stop sending me personal messages!!! You will get no reply from me! Quote
Griga Posted March 1 Posted March 1 Am 27.2.2026 um 12:59 schrieb الهاوي: Does the CAM work on the TechnoTrend Connect S2-3650 CI device... without any problems... Whether it works or not depends on the CAM that you want to use. I have no experience with it. As already mentioned here, I only have a Technotrend S2-3600 without CI. Your TechnoTrend Connect S2-3650 CI is quite old, so it is not sure that it works with a modern CAM. You must try... Quote
الهاوي Posted March 1 Author Posted March 1 (edited) Am 27.2.2026 um 14:05 schrieb Griga: توقف عن إرسال رسائل شخصية لي!! لن تتلقى ردا مني! vor 4 Stunden schrieb Griga: ما إذا كان يعمل أم لا يعتمد على الذاكرة الإلكترونية التي تريد استخدامها. ليس لدي أي خبرة معه. كما ذكرت سابقا هنا، لدي فقط Technotrend S2-3600 بدون CI. جهاز TechnoTrend Connect S2-3650 CI الخاص بك قديم جدا، لذلك ليس من المؤكد أنه يعمل مع كاميرا حديثة. يجب أن تحاول... What is the best satellite card that works with the camera CAM without problems Edited March 1 by Griga Corrected: camera -> CAM (Conditional Access Module) Quote
الهاوي Posted Monday at 07:25 PM Author Posted Monday at 07:25 PM 1 - Does the satellite card now count as a CAM reader? According to the pictures 2 - Are there steps I need to take to make it a CAM! 3 - I have a Conex card here, will it work on an Ardito CAM... 4 - The required channels are terrestrial network channels and the subscription is official. The location.. Yemen Quote
Griga Posted Tuesday at 04:41 AM Posted Tuesday at 04:41 AM vor 9 Stunden schrieb الهاوي: 1 - Does the satellite card now count as a CAM reader? According to the pictures Yes. If you get the output shown in the pictures, the CAM is detected and can be used. vor 9 Stunden schrieb الهاوي: 2 - Are there steps I need to take to make it a CAM! The requirements for your Technotrend device in DVBViewer are ttBdaDrvApi_Dll.dll must be present in your DVBViewer program directory. Settings -> Options -> Hardware -> Has CI module must be checked 3 - I don't know. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.