AlDarion Posted August 19, 2006 Share Posted August 19, 2006 Can you try this version i attached? Yes, this version works just the same as the one I have found. Also the CAM menu entries problem is still there. Can someone confirm this? Quote Link to comment
hackbart Posted August 19, 2006 Share Posted August 19, 2006 which cams did you tried? The mmi is completely handled by the sdk and i will forward this to Technotrend Christian Quote Link to comment
AlDarion Posted August 20, 2006 Share Posted August 20, 2006 which cams did you tried? I was afraid you'd be asking this question. It's a T-Rex, I'm not expecting support for this, but was just wondering if someone with a more "regular" CAM has the same problem. If not, forget it. It's not important anyway. Quote Link to comment
pankov Posted August 22, 2006 Share Posted August 22, 2006 Ironically, the primitive TT Media Center program that came with the S2-3200 card works fine with both my Irdeto and Nagra CAMs on all the channels I subscribe to, including HD1 at 7° East (w/ Irdeto CAM) and the three Premiere HD channels at 19.2° East (w/ Nagravision CAM).Cheers. Let me see if I understand you correctly: You can watch the Premiere HD channels on your PC monitor with this DVB-S2 PCI card, right? Aren't they supposed to be HDCP protected? Did Premiere drop the protection??? Quote Link to comment
Rittberg Posted August 22, 2006 Share Posted August 22, 2006 Ironically, the primitive TT Media Center program that came with the S2-3200 card works fine with both my Irdeto and Nagra CAMs on all the channels I subscribe to, including HD1 at 7° East (w/ Irdeto CAM) and the three Premiere HD channels at 19.2° East (w/ Nagravision CAM).Cheers. @Threepwood Can you advise the type/make of the Nagravision cam that you are using in your S2-3200's PC . Thanks, Rittberg Quote Link to comment
Griga Posted August 22, 2006 Share Posted August 22, 2006 Please pay attention to this: http://www.DVBViewer.com/forum/index.php?s...st&p=105892 ...and find other ways of communicating. I don't want to close all HDTV threads here. @Rittberg: Last warning. Quote Link to comment
Zyknyp Posted August 22, 2006 Share Posted August 22, 2006 (edited) Let me see if I understand you correctly:..Aren't they supposed to be HDCP protected?.. HDCP does diddly-squat about PC-Sat viewing. Edited August 22, 2006 by Zyknyp Quote Link to comment
linowsat Posted August 22, 2006 Share Posted August 22, 2006 (edited) @htpcman, can you get SCPC transmissions with your multifeed arrangement? I'm interested in the symbol rate range of DVB-S1/2 demodulator on your card (STB0899 from STM). Hi community, hi Derrick coming back to your question. SCPC reception works fine, I've tried sucessfully to lock the HotBird 'M2' tranponder at 12.145 Ghz, Hor, with a SR of 3333 Msymbols. Do you have a more difficult scpc job for the card? I'm just receiving 13,19.2,23.5 and 28.2/28.5°E. Oliver Edited August 22, 2006 by linowsat Quote Link to comment
Zyknyp Posted August 22, 2006 Share Posted August 22, 2006 Hi community, hi Derrick coming back to your question. SCPC reception works fine, I've tried sucessfully to lock the HotBird 'M2' tranponder at 12.145 Ghz, Hor, with a SR of 3333 Msymbols. Do you have a more difficult scpc job for the card? I'm just receiving 13,19.2,23.5 and 28.2/28.5°E. Oliver For sure the Technotrend 3200 has a better tuner than SS2: with the former I can watch without a glitch channels whose reception isn't almost enough for a good watch with the latter (using same dish/twin LNB). Quote Link to comment
Griga Posted August 24, 2006 Share Posted August 24, 2006 We need feedback from someone who is using the TT 3200 with DiSEqC. Are there any problems when tuning a channel with DiSEqC other than A/A, closing DVBViewer and relaunching it? Is the last channel tuned correctly without additional measures? The retune option on the Settings -> Options -> Hardware Tab must be set to 0 for this test. Thanks in advance Quote Link to comment
fedmond31 Posted August 24, 2006 Share Posted August 24, 2006 We need feedback from someone who is using the TT 3200 with DiSEqC. Are there any problems when tuning a channel with DiSEqC other than A/A, closing DVBViewer and relaunching it? Is the last channel tuned correctly without additional measures? The retune option on the Settings -> Options -> Hardware Tab must be set to 0 for this test. Thanks in advance I have no problem at all, i have A/A=HB, B/A=Astra28.2 ,A/B=Astra19 , it works all the time , whatever LNB is last channel. Quote Link to comment
Zyknyp Posted August 25, 2006 Share Posted August 25, 2006 No problem here either: A/A Hotbird 13°E - B/A Astra 19,2E° - A/B Thor 0.8W° Retune correctly too (only thing, if it's a Favourite channel, it's diplayed as the wrong channel, that is, let's say I've got as Favourites channels "1", "2" and "3", if the last channels tuned was "2", when I relaunch DVBViewer it does tune that channel, but it's displayed in the Favourite list as "1" channel). Quote Link to comment
reeh Posted October 1, 2006 Share Posted October 1, 2006 This is weird, but maybe a problem caused by me. I use the Api in version 1.0.0.5 but i forgot to put it into the installer. Can you try this version i attached? Christian This is the wrong forum - but the proper thread ... I have had to update the ttAPI.dll as suggested in order to get the CI-module to work with a TT C-1500 ... I am having the same CAM menu problems - first item not shown - as reported by others. Hardware: Medion 8883 - 3.2GHz P4 HT - 1GB RAM ATI Radeon 740XL Graphics TechnoTrend Budget C-1500 Cable Receiver Technotrend Budget PCI CI Viaccess I/II CAM (V484) TDCKabelTV smartcard Software: WinXP Home SP2 - all updates TechnoTrend BDA Driver version 4.4.10.17 DVBViewer 3.5 PRO - DVB Source 2.8.0 and 2.8.1 Video- and audio decoders: CyberLink, Nero, and InterVideo 'ttAPI.dll' posted by 'hackbart' on Aug 19 2006, 01:26 PM -- Erik Reeh Quote Link to comment
Dr. Cain Posted October 15, 2006 Share Posted October 15, 2006 Cam works fine here, however it takes a while to access the CAM so decoding doesn't begin as fast the first time as on a regular STB. Quote Link to comment
ErwinMeulman Posted December 24, 2006 Share Posted December 24, 2006 (edited) Cool for me too, whit my T3200. Its a perfect Card! But can you make the CAM faster? No 3seconds but <1 second Edited December 24, 2006 by ErwinMeulman Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.