Terratec Cinergy DVB-C, Transedit

[el_domingo]

I am using Terratec Cinergy Pci S2 and DVB-C both in my HTPC.

 

When trying Transedit scan DVB-C give message "could not initialize dvb device...". I am using custom Transponderlist.

DVBViewer scan fine.

 

Terratec Pci DVB-C driver version: Cinergy_C_PCI_Drv_Setup_1.01.02.501_XP_Vista_7

 

Here transedit.ini hardware section as follows;

 

[Hardware]

Name.0=Cinergy C PCI Digital Tuner

ID.0=@device:pnp:\\?\pci#ven_1822&dev_4e35&subsys_1178153b&rev_01#4&35e69562&0&30a4#{71985f48-1ca1-11d3-9cc8-00c04f7971e0}\{bcc1431a-b717-4f7d-b47b-11ef8363798c}

TunerType.0=0

Groups.0=255

Status.0=1

DeviceNr.0=0

DeviceType.0=1

StopStreaming.0=0

AutoRetune.0=0

StandardInterface.0=0

Vendor.0=5

InternalNP.0=0

TuningSpace.0=Internal

Name.1=Cinergy S2 PCI Digital Tuner

ID.1=@device:pnp:\\?\pci#ven_1822&dev_4e35&subsys_1179153b&rev_01#4&35e69562&0&38a4#{71985f48-1ca1-11d3-9cc8-00c04f7971e0}\{acec2d03-bdec-44c0-9a97-c577f6ee2602}

TunerType.1=1

Groups.1=255

Status.1=1

DeviceNr.1=1

DeviceType.1=1

StopStreaming.1=0

AutoRetune.1=0

StandardInterface.1=0

DVB-S2.1=1

DiSEqCCount.1=1

Vendor.1=5

InternalNP.1=0

TuningSpace.1=Internal

 

 

Here Transponder as follows; (I copied and changed my frenquencies)

 

[sATTYPE]

1=4000

2=KABLO

 

[DVB]

0=383

1=86000,,2667

2=93000,,1778

3=93000,,1778

4=100000,,2160

5=100000,,2160

6=108000,,6250

7=108000,,6250

8=108000,,6250

9=108000,,6250

10=108000,,6250

11=108000,,6250

12=108000,,6250

13=108000,,6250

14=108000,,6250

15=108000,,6250

16=108000,,6250

17=108000,,6250

18=108000,,6250

19=108000,,6250

20=108000,,6250

21=108000,,6250

22=108000,,6250

23=108000,,6250

24=115000,,1734

25=115000,,1734

26=115000,,1734

27=122000,4,5714

28=122000,4,5714

29=122000,4,5714

30=122000,4,5714

31=122000,4,5714

32=122000,4,5714

33=122000,4,5714

34=122000,4,5714

35=122000,4,5714

36=122000,4,5714

37=122000,4,5714

38=122000,4,5714

39=122000,4,5714

40=122000,4,5714

41=122000,4,5714

[el_domingo]

No any comments !!!!

[Griga]

Important information is missing.

 

http://www.DVBViewer.tv/forum/index.php?showtopic=2210

[el_domingo]

here is support.zip

support.zip

[Griga]

When trying Transedit scan DVB-C give message "could not initialize dvb device...".

It's a known problem under Windows 7 with TransEdit 3.6, caused by the Microsoft Network Provider Filter. Launch TransEdit with administrator rights and take care that the device is used somehow. After that it will work without administrator rights.

 

Another possibility is to tick Settings -> Hardware -> Use internal Network Provider filter (which is recommendable if it works with your device), but it isn't a general solution, because the problem will re-appear if you untick the checkbox.