Digital Devices Cine S2 V6 DiSEqC 1.1?

[boborg]

I have just replaced a Floppy DVB-S2 with a Digital Devices Cine S2 V6. I have a DISEqC 1.1 EMP Centauri which worked fine with delay 150 and uncomitted for the LNB's. The Digital Devices Cine S2 V6 does not work with this. Only Uncomitted 1 seems to be pretty stable. When switching to others mostly no signal.

 

I have tried experimenting with delay value but not had any succes? Any ideas to what I could try next?

Edited August 18, 2011 by boborg

[Tjod]

You need the Hardware Database Update version 3

http://www.DVBViewer.tv/forum/topic/44372-hardware-database-update/page__view__findpost__p__343223

DVBViewer Pro 4.8.1 is not able to detect this card correct without this.

[boborg]

Thanks for the reply. Sadly this did not fix the switching issue. It works some times but say I go from 28,2 east channel to 13 East channel and then back to the same 28,2 east channel it does not work.

 

I switched with a Satconn X10 or something like that DiSEqC switch. Seems to work after playing around a bit with delay.

Edited August 18, 2011 by boborg