Jump to content
Sign in to follow this  
Tony

TransEdit 3.9.2.0 oops

Recommended Posts

Tony

Hi Griga & Lars,

Oops ... UPC CR began testing 256QAM, TransEdit 3.9.2.0 incorrectly shows the modulation in the left window ...
TransEdit 4.0 shows the QAM correctly

.

Edited by Tony

Share this post


Link to post
CiNcH

TransEdit just shows there what is specified in the ini file, so the value that has been specified for scanning. Seems your TBS can determine the modulation automatically in case a wrong one is specified...

Share this post


Link to post
Griga

QAM64 on the left side is not a "detected" value, but simply reflects the modulation setting for this transponder in the main window. If your device is able to detect the modulation automatically, it will receive QAM256 with an arbitrary modulation setting.

 

If you want to see the true modulation, have a look at the cable delivery system descriptors in the NIT - Actual Network.

 

Oops - CiNcH was faster...

Share this post


Link to post
Tony

Gentlemen, you are both right, of course, thanks for the clarification.

Apparently, the only 256QAM = Auto and only then overwrites the modulation type in the ini file ...?
(UPC CR tested yet, so the NIT does not contain new channel)

Share this post


Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...