DVBSky-S950 (PCIE)" and the "STAB HH-100", problem...

[bgiusti]

Hello everyone this is the first time that I am writing, I need a help.

 

I have a "DVBSky-S950 (PCIE)" and the "STAB HH-100"
I can not move dish the with "BVBViewer 5.3".

 

The "STAB HH-100" is configured with "DiSEqC 1.2".

 

The engine works if I connect it to AZBox.

 

Between the PC and STAB, there are 25mt.

 

I have Win7 64 on "ASUS H87m-plus" with 8GB Ram, a simple PC.

 

Where I'm wrong or "DVBSky-S950 (PCIE)" and the "STAB HH-100"
with "BVBViewer 5.3" do not communicate well?

 

Thank you for any replies.

 

Hoping to solve my problem, Thanks again.

 

Bye, Bruno.

[Derrick]

Try the DiSEqC Editor of Transedit. If it doesn't work it's probably not implemented for you card.

[bgiusti]

I tested the power output of S950, these values :

- no load (S950->1mt Sat cable witout a motor) 13,5 or 19,5

- with load (S950->25mt->motor) 5volts Always

 

The extra supply power adapter is connected to S950.

 

For me 25mt. is too much for the S950,

 

I think I'll have to buy the interface "MS220" from Stab.

[bgiusti]

Hello problem solved!

I purchased the "MS220" of the "STAB".

 

The "S950" NOT able to move the dish if there is 25mt. between card and satellite dish.

 

Bye, Bruno.