SkyStar2 channel viewing problem

[macko]

I have problems with my Skystar2 card after I reinstalled Windows XP on my computer.

On DVBViewer when I select channel it seams that the correct frequency is locked (small satelite icon in taskbar becomes green) but I can not view the channels.

After I isntall drivers (4.2.2.2) and DVB software after reboot it tries to register the card, so I connetct internet and when I press "register" it opens Internet explorer but I get no site found and I can't continue.

Please give me instructions where I'm going wrong?!

[Guest Oliver]

After I isntall drivers (4.2.2.2) and DVB software after reboot it tries to register the card, so I connetct internet and when I press "register" it opens Internet explorer but I get no site found and I can't continue.

Please give me instructions where I'm going wrong?!

I don't even know what you're talking about. There is nothing to "register". BTW: You should use a newer driver.

 

Bye

[Griga]

Maybe one of the old Europe Online cards? There were special editions for internet via satellite and kind of locked without registration.

 

I'd try driver 4.2.8. Download

[macko]

After I isntall drivers (4.2.2.2) and DVB software after reboot it tries to register the card, so I connetct internet and when I press "register" it opens Internet explorer but I get no site found and I can't continue.

Please give me instructions where I'm going wrong?!

I don't even know what you're talking about. There is nothing to "register". BTW: You should use a newer driver.

 

Bye

<{POST_SNAPBACK}>

 

There is staletile icon on the taskbar and with right-click there is "register" button.

However I will try with new drivers.

[Guest Oliver]

The trayicon belongs to Setup4PC, you don't need that running, it must only be installed. With the 4.3.0 driver you'll also get the latest DVBViewer TE. Attention: The download-version of the driver does not contain MPEG2-decoders. Maybe you forgot to install decoders when setting up your system again.

 

Bye

[macko]

The trayicon belongs to Setup4PC, you don't need that running, it must only be installed. With the 4.3.0 driver you'll also get the latest DVBViewer TE. Attention: The download-version of the driver does not contain MPEG2-decoders. Maybe you forgot to install decoders when setting up your system again.

 

Bye

<{POST_SNAPBACK}>

 

Thank you guys, I downloaded newest driver and it work, just I needed some time- i have very slow dial up connection