Access Violation and missing LCN during "Scan All" with Terratec Cinergy T2

[AndreaB]

Hi everyone,

I am experiencing an issue with the latest version of TransEdit and my Terratec Cinergy T2 stick.

The problem occurs during the scanning process:

• If I scan a single frequency (or just 2-3 of them), everything works perfectly: the scan finishes correctly and the LCN column is fully populated.

• However, when I perform a full scan (Scan All), the software throws an "Access Violation" error (see attached image).

• This is followed by a blank "Channel numbering selection" window, and once the process is over, the LCN field is empty for all channels.

Troubleshooting already performed:

• I am using the latest available drivers for the TV card.

• I have already tried increasing the PAT, SDT, and PMT Timeout values to 8000 ms, but the issue persists.

Has anyone encountered this "Access Violation" during full scans, or is there a specific setting I should look into to fix the LCN detection?

Thanks in advance for your help!

 

Andrea

[Griga]

Rather looks like a TransEdit bug, not hardware or driver-related.

 

Please attach your TransEdit.ini, so I can see your settings.

 

vor 8 Stunden schrieb AndreaB:

However, when I perform a full scan (Scan All), the software throws an "Access Violation" error (see attached image).

 

In theory there should be no difference to scanning a single frequeny. Maybe due to a transponder close to the end of the list?

 

[AndreaB]

Hi Griga,

I performed a single scan for all individual transponders, and the scan was successful for the first 9 with a usable signal.

However, an error consistently occurs with the last two frequencies that have a signal: 674,000 kHz and 690,000 kHz.
If I disable the option 'Scan NIT, BAT, and VCT...', the problem does not occur.

 

I managed to resolve the issue for the 674,000 kHz frequency by increasing the 'PAT Timeout' to 6500.

As for the 690,000 kHz frequency, I haven't found a PAT value or any other setting that prevents the error. I checked the Analyzer and all the indicated values (packet counts) are increasing. This suggests that the stream is being received, yet the LCN remains missing and the error persists during a standard scan.

Ciao,

 

Andrea

 

PS: Is it possible to have a little more space for attachments? I have to keep deleting old images to post new ones, but the old ones might still be useful...

TransEdit.ini

Edited 1 hour ago by AndreaB