Jump to content
Guest Lars_MQ

Technotrend Remote input plugin

Recommended Posts

mr.pm

Works with Hauppauge Nova too!!!

 

Thanks!!!

Share this post


Link to post
Lars_MQ

OK, I take down the old Plugin and move the new Plugin from the Beta Section to the Plugin section.

 

So there is no need to download it again. ;)

Share this post


Link to post
VanNameless

My TTRemote plugin for DVBViewer ( Technotrend Remote Plugin 1.1.0 ) don't Work with the new - TT-budget / Nova BETA Version 5.0.0.2 (15.05.07) Driver.

My TV-Card = TT 3200 S2

My OS = Windows Vista x64

 

What can i do ?

Share this post


Link to post
Lars_MQ
What can i do ?

Go back to winXP 32 and use the standard drivers. ;)

Share this post


Link to post
CiNcH

Under XP32 the new plugin with new TT API-DLL even works with new beta driver 5.0.0.2. Think we have to wait until TechnoTrend officially releases the 64-bit stuff. Most likely the API-DLL does not work together with the 64-bit driver.

Share this post


Link to post
darky
My TTRemote plugin for DVBViewer ( Technotrend Remote Plugin 1.1.0 ) don't Work with the new - TT-budget / Nova BETA Version 5.0.0.2 (15.05.07) Driver.

My TV-Card = TT 3200 S2

My OS = Windows Vista x64

 

What can i do ?

 

same problem here...

 

--> os: windows vista ultimate 64bit

 

solution? it would be nice if the plugin works also with 64bit!

Edited by darky

Share this post


Link to post
Lars_MQ

The solution was told above. I don't have time or interesst to do anything for vista 64. maybe in 3 or 4 years, if there is a real need to use a 64bit OS for me ;)

Either TT corrects this problem or you have to live without remote.

Share this post


Link to post
darky
Either TT corrects this problem or you have to live without remote.

 

Which problem exactly? Maybe, I can contact the TT support...?

Share this post


Link to post
cescalby

The plugin working perfectly with my S2400 and S2-3600 under xpsp2 thank you

Share this post


Link to post
darky

hi,

hab mal beim TT-Support angefragt bezügl. der FB mit Vista 64bit und folgendes als Antwort erhalten:

 

Sehr geehrter Herr XXXX,

 

entschuldigen Sie bitte unsere etwas verspätete Antwort.

 

Erstmal vielen Dank für Ihren Hinweis, dieser Fehler ist uns seit neuestem bekannt. Wir versuchen dieses Problem so schnell wie möglich zu beheben und in unserem nächsten Rlease bereit zustellen.

 

Bitte haben Sie noch etwas Geduld.

 

Also kann man ja hoffen, dass das später vllt. funktionieren wird.

Share this post


Link to post
karlo

Hmmm....

 

Hat denn keiner mein Problem mit dem Bildseitenverhältnis?

Oder steht darüber etwas in einem anderem Forum was ich übersehen habe? :)

Share this post


Link to post
Lars_MQ

Was hat das bildseitenverhältnis bitte mit einem fernbedienungsplugin zu tun??

Share this post


Link to post
karlo

Grrr......

 

Natürlich falsches Forum :) !!

Kommt davon, wenn man mehrere Fenster auf hat....

Hab das Problem ja auch in 'BETA' geschrieben.....

 

Tschuldigung :)

Share this post


Link to post
CiNcH

TT-connect S2-3600 USB2-Box works like a charm too.

Edited by CiNcH

Share this post


Link to post
hagie

Hi,

 

I have a WinTV Nova-HD-S2. It was bundled with a Remote and a small receiver which is attached to the Card. The RC works in Power Cinema with the help of a small programm called ir.exe / irremote.dll which was installed in the WinTV Directory.

 

How can I get this remote to work with DVBViewer? The TT Input Plugin don't show any device to choose from neither does the ttrendtest aplicatopn.

 

Any advice ?

 

Thanks

Hagie

Share this post


Link to post
Moses

try the ir.exe? What does it do? Send Keyboard-strokes? Then it may work in DVBViewer, too...

Share this post


Link to post
hagie

the ir.exe is mandatory for powercinema. It looks like it is bundes with the WInTV software and acts as an interface between Hardware and Software. The programm itself does nothing - the only option is to close the pgrammm.

 

this is the programm called ir32

 

http://www.hauppauge.de/files/ir32/ir32_2_51_24342.exe

 

Thanks

Hagie

Share this post


Link to post
Lars_MQ

guys take it to an own thread, this has nothing to do with the technotrend stuff.

Share this post


Link to post
hagie

ok will do in the german forum

 

thanks

hagie

Share this post


Link to post
Lars_MQ

I updated the Plugin to version 1.1.1.

 

Please check your remote settings.

Share this post


Link to post
Lars_MQ

There has been a bug in the last release 1.1.1 . A corrected version 1.1.1a is in the membersarea.

Share this post


Link to post
darky

with 64bit (vista), this plugin still doesn't work?!

Share this post


Link to post
CiNcH

Not with PCI cards, correct.

Share this post


Link to post
Mugga

I think you could use Girder 5 beta which is running under Vista and the Girder plugin for DVBViewer. Or when the Plugin doesn't work with the new beta, you can set in Grider the remote buttons to keyboard keys and then use it with DVBViewer.

 

I think i will give it a try when i'm back home, because the remote from my TT-3200 isn't working either under Vista x64 and that sucks!

Share this post


Link to post
CiNcH

Yes, you will need an infrared receiver for the serial port for example which works like a charm. I am using latest Girder freeware version 3.2.9 which also works under Vista together with IgorPlug for serial port infrared receiver control and access.

Edited by CiNcH

Share this post


Link to post
Mugga

do i really need an infared receiver for the serial port?

 

i thougt i could use the receiver from my tv card. But the infared receiver shouldn't be the problem, i have and old one for serial at home.

 

And the 3.2.9 is working unter Vista x64? And is the IgorPlug for DVBViewer or what is this?

Share this post


Link to post
CiNcH
i thougt i could use the receiver from my tv card.

You can't unless you write a Girder input plugin implementing the TT-API...

 

And the 3.2.9 is working unter Vista x64?

Don't remember whether I have verified that under Vista 32 or Vista 64. Went back to XP anyway...

 

And is the IgorPlug for DVBViewer or what is this?

IgorPlug is an input plugin for Girder. It catches the demodulated infrared signals from the serial port receiver and decodes them. Girder then mapps the decoded codes to DVBViewer actions via the DVBViewer output plugin.

 

http://www.cesko.host.sk/girderplugin.htm

Edited by CiNcH

Share this post


Link to post
Mugga

Ok then i will give it a try. Hope this works!

Share this post


Link to post
JPL

I looked fews hours in the forum and I could not get a solution to my problem.

 

I have a Skystar 2 with a tts35ai serial remote.

 

I always use it with DVBViewer pro and winlirc, but now with the 3.8.0.0 version, I don't arrive to make the configuration.

 

Before I just had to choose the winlirc plugin in the input plugin, but now it ask for a port etc...

 

If I don't find a solution I will try Girder and igorplus, but if somebody can help me, I will prefer to stay win winlirc

 

Thanks

Share this post


Link to post
CiNcH

WinLIRC is for receiving and decoding the incoming infrared signals. It then creates a command and sends it via TCP/IP protocol to all its clients. DVBViewer is a client and connects to the WinLIRC server on a specific port, typically 8765 for LIRC (IP is most likely 127.0.0.1 since the server runs locally). I have never used the WinLIRC plugin within DVBViewer...

Share this post


Link to post
JPL

Thank you very much for the quick answer.

 

It´s funny but I gave this information manually again (it was already written), click "apply" and it just work !!!

 

THANKS AGAIN

Share this post


Link to post
marosy
There has been a bug in the last release 1.1.1 . A corrected version 1.1.1a is in the membersarea.

 

Lars, can you add support for Technisat Skystar USB PLUS?

 

The hardware is identical with Technotrend S-2400, maybe the device ID is different.

 

Here is the log of the test application:

 

ttremote.log

 

Thanks.

Edited by marosy

Share this post


Link to post
robby2

Hi

 

whats up with the S2-3650 USB Box.

Is there a possibility for remote controll with the original remote controller??

 

Thanks

 

Best regards

Robert

Share this post


Link to post
mark100

OSD ok deletes recordings on OSD My recordings... ;)

Share this post


Link to post
Lars_MQ

mosdt likely it only deletes the database entry cause the recording files are not present. please check.

Share this post


Link to post
mark100

"mosdt likely it only deletes the database entry cause the recording files are not present. please check."

 

You were right. Windows couldn`t see my external hard drive for some reason. After restarting the harddrive, OSD ok plays again.

Share this post


Link to post
KARABAYA

Can you post the new ttremote plugin?

Share this post


Link to post
Tjod

Go in the Members Section > Input plugins there is the Technotrend Remote Plugin 1.1.1a.

Share this post


Link to post
KARABAYA

I can`t download probably it some bug . Can you sent that file on my e-mail? Thank you

Share this post


Link to post
hackbart

Usually we dont do this, but drop me an email :)

 

Christian

Share this post


Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...