Jump to content

Telekom Entertain kein Bild/Ton mehr


Recommended Posts

Seit 2 Tagen wird bei Telekom-Entertain - Sendern kein Bild und kein Ton mehr angezeigt, außerdem ist nach Aufruf des DBViewers auch kein Webseitenaufruf mehr über die Browser (Edge. Firefox)  möglich. obwohl die Verbindung besteht und Fernsehen über den Media-Receiver funktioniert.

Neu installiert wurde eine Update von GDATA Total Security auf die Version, m.E. tritt das Problem seit diesem Zeitpunkt auf.

Link to post
  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

    • muffi6
      By muffi6
      Bis vorgestern lief der DVBViewer pro ganz wunderbar mit Entertain. Jetzt wurde auf MagentaTV umgestellt und ich habe die Entertain-Channellist gelöscht und die MagentaTV-Liste importiert. Ich bekomme jedoch kein Bild angezeigt. Wenn ich die Adressen aus der MagentaTV-Channellist im VLC eingebe, werden die Sender wunderbar abgespielt. Ich habe keine Idee mehr, was ich noch ausprobieren könnte.
    • Lars Andersen
      By Lars Andersen
      I'm still in the middle of setting up my IPTV system with kodi as frontend.
      Right now I'm testing several IPTV providers. Quite often I record two streams at a time. The providers seems to handle this in two ways. A) Either they give me two separate accounts or B ) allowing one account to have two streams running at the same time.
      I have at the moment not added any hardware devices and iptv streams are playing ok. But I don't get any warnings if i'm about to schedule a timer that violate the max two streams I'm allowed to use.  Or if I start a live streaming from the tvguide and the system all ready is recording two streams.
      I can see there is a hardware device "TS Stream device"  and "DVB IPTV network device". Do I need to setup any of those and how does this work with the A) and B ) senario?
    • raido343
      By raido343
      I can't get IPTV working in DVBViewer Pro.
      Now, what i have done:
      - TransEdit ( -> New List -> DVB IPTV
      - Blind Scan -> IPs and port -> Scan
      - Scan ready, now Update All and close, in TransEdit windows Save and save channels list.
      - DVBViewer -> Settings -> Options -> Hardware -> Add -> DVB IPTV Network Device -> Apply -> OK
      - DVBViewer -> Channel Editor -> Import the channels list -> Selecting earlier saved list -> Open
      All channels founded are in list but not working. Is there someting more what i have to set up?
    • leviscar
      By leviscar
      Hi All,
      I have used and currently still use Neutrino CL (CL=Channel List) plugin:
      Surely many users have used and appreciated it.
      But I would report the same a brief description of this plug-in, in order 
      to highlight its great usefulness.  
      Neutrino CL is an add-on supported by many osd interfaces, with the following key features:
      - It shows your channel list, organized in different sub-lists. 
      Each sub-list corresponds to a folder that you have previously defined in the channel editor.
      When the neutrino CL is displayed you can simply press left and rigth keys
      to switch between different sub-lists.
      Up and down keys are used to scroll, and enter to select the channel.
      - EPG information are also showed in a very synthetic way. At the righ of each channel name
      you can immediately see which is the current program broadcasted on that channel.
      I will had some plugin snapshots as next post. 
      Unfortunately the plugin is not yet mantained by its creator, Pmneo.
      Last revision date is January 14, 2013.  
      But the good news is that the creator, kindly shared the source code for possible
      future development by other people. 
      The most important current limitation (due to the fact that the plug-in has not been updated since almost 4 years)
      is that the IPTV channels are not fully supported: IPTV channels list are recognized and displayed,
      but the EPG information is not correctly managed and displayed for them.
      I do not have any experience on DVBViewer plugin development, neither on Delphi language.
      But I have experience on other programming languages. 
      So I gave a look at the Plugin Delphi code looking for the possible reasons why IPTV EPG information
      is not correctly imported and displayed.
      The main plugin source code file seems to be 'UPlugin.pas'. 
      Another important source file is 'plgGlobals.pas' containg data and function definitions.
      Looking for the string 'tuner' I noticed that the 'TS stream' tuner type (used for the IPTV channels)
      is not supported.
      I also notice that the EPG information is extracted form the DVBViewer database using the channel 
      SID. This is another problem for the IPTV channel, because they have a dummy SID parameter,
      often set to 1 for all of them (it should be instead be univocal, as happens for DVB-T/S channels).
      So it seems that in order to support EPG data for IPTV channel, two main  modification
      are needed:
      1)extend the recognized 'tuner' types, by adding the 'TS stream' category;
      2)don't use the SID as acces key to retrieve the EPG data, but another channel univocal parameter.  
      Is there someone expert in plugin developing who could provide help 
      to upgrade this plugin?
      I think it could be very useful and appreciated to all the users who still are using this
      very nice and powerful plugin. 
      I do not see any other equivalent plugin with the same unique and very handy features...
    • laola
      By laola
      Hallo beisammen - vermutlich ist es ganz einfach - baer irgendwie fehlt mir die zündene Idee...
      Also - ich habe DVBViewer/Mediaserver2.03/Kodi V17 problemlos am laufen (4 SAT-Karten - bis zu 6 Clients). Alles kein Problem. 
      Nun möchte ich aber gerne noch den IPTV client in meinem Fernseher mit den Signalen von meinem HTPS Server zum Laufen bringen. Ich hätte gedacht, dass eine m3u-Liste zum Exportieren vom DVB Server ausgereicht hätte. Getan - aber dort tauchen dann nur die IPTV Kanäle auf, die ich zuvor importiert hatte. Ich dachte eigentlich, für jeden DVB-Kanal wird eine (interne) IP/port Adresse vergeben und dann wird mittels  IPTV client darauf zugegriffen. Dies hätte evtl. auch noch den Vorteile, über "normale" IPTC clients auf dem Handy auf meine SAT Sender zugreifen zu können...
      Wie gesagt - vermutlich ganz einfach - aber mir fehlt die Idee...
  • Create New...