Jump to content
Sign in to follow this  
Bonzey

RS error while decoding WEB streaming FFMPEG

Recommended Posts

Bonzey

Hallo

 

Ich habe probleme mit den HD Streams über das web interface flash.

Es reisst sporadisch immer der Stream ab :mad: . SD sender funktionieren ohne probleme.

Habe auch alle default profile getestet tritt aber bei jedem auf.

Habe auch schon auf die x64 FFMPEG gewechselt und es ist das selbe problem.

Direkter Stream über VLC passt:

 

Villeicht hat jemand eine Lösung.

 

NET:

100/10

OS:

WHS 2011

HW:

WinTV-HVR-5500-HD

AMD Phenom II 3x 2,5 Ghz bei HD streming ca 70% auslastung geht auch nicht auf 100% wenn der fehler auftritt.

8 GB RAM / 1333 beim streamen noch ca 1.5 GB frei

HDD WD Blue 500GB

19.01.14 08:51:19.868 FFMPEG frame= 9116 fps= 21 q=27.0 size= 106913kB time=00:07:08.80 bitrate=2042.5kbits/s
19.01.14 08:51:20.391 FFMPEG frame= 9130 fps= 21 q=27.0 size= 107080kB time=00:07:09.36 bitrate=2043.0kbits/s
19.01.14 08:51:20.894 FFMPEG frame= 9143 fps= 21 q=23.0 size= 107153kB time=00:07:09.88 bitrate=2042.0kbits/s
19.01.14 08:51:21.421 FFMPEG frame= 9157 fps= 21 q=18.0 size= 107307kB time=00:07:10.44 bitrate=2042.2kbits/s
19.01.14 08:51:21.575 FFMPEG [mpegts @ 026cf980] PES packet size mismatch
19.01.14 08:51:21.612 FFMPEG [h264 @ 0501f860] Reference 2 >= 2
[h264 @ 0501f860] error while decoding MB 70 35, bytestream (5730)
19.01.14 08:51:21.667 FFMPEG [ac3 @ 026c9d40] exponent out-of-range
[ac3 @ 026c9d40] error decoding the audio block
19.01.14 08:51:21.671 FFMPEG [ac3 @ 026c9d40] frame sync error
Error while decoding stream #0:1: Invalid data found when processing input
19.01.14 08:51:21.687 FFMPEG [h264 @ 03b96ea0] reference picture missing during reorder
[h264 @ 03b96ea0] Missing reference picture, default is 2147483647
19.01.14 08:51:21.707 FFMPEG [h264 @ 0501f860] mmco: unref short failure
Last message repeated 1 times
[h264 @ 0501f860] number of reference frames (0+4) exceeds max (3; probably corrupt input), discarding one
[h264 @ 0501f860] reference picture missing during reorder
19.01.14 08:51:21.708 FFMPEG [h264 @ 0501f860] Missing reference picture, default is 83312
19.01.14 08:51:22.564 FFMPEG frame= 9163 fps= 21 q=20.0 size= 107578kB time=00:07:18.93 bitrate=2007.8kbits/s
19.01.14 08:51:23.066 FFMPEG frame= 9163 fps= 21 q=20.0 size= 107578kB time=00:07:19.74 bitrate=2004.1kbits/s

 

Mfg Bonzey

Share this post


Link to post
Sign in to follow this  

  • Similar Content

    • nickneutrino
      By nickneutrino
      Always when  i play a transcodec 4K MKV H265 to WEBM stream from Dbviewer Media Web Server appear in the middle of screen a circle.
       
      Anybody knows Is posible remove that circle and for what reason show this circle because the movie plays well? 
    • bph
      By bph
      Hi,

      I did not use DVBViewer for a while... but i am back, my setup works I have a Terratec Cinergy S2 PCI HD receiver, working on windows 10 (most new updates)
      I do not use edge, but firefox. (versions 64 &64bit)
      I used to open a (recorded) stream from the mediaserver localhost browser pressing the play button on the description, either in the whole recordings overview or the separate recording.
      That would open up a open with popup, that I found i can now only get when in the stream config , by pressing start direct stream.
      If I open the file(s) directly from my harddisk they play in DVBViewer. But if i try to open the master.m3u8 file from the temp folder which i believe is created when pressing the play button, i get nothing playing in DVBViewer, and when i open the url i find in it in localhost like this: http://localhost:8089/stream.m3u8?preset=2&streamid={0B0D3BA1-8C92-4B7D-939A-8490B33852AD} i get a 404 not found, maybe that is not how to test it, but i tried.
      I do see that in the edge browser, when pressing the play button, it plays the file in the edge browser.

      Some examples attached as screenshots.
      There has been an itunes messing with the m3u and m3u8 files but i reset them to open with DVBViewer, i believe i found windows 10 cannot have none program associated with these files anymore, which i hoped to be able to get the "open ....m3u(8) " . But i am not sure if that would solve it either.
      If you have an idea  how to get the play button working again from firefox, so that I can open it directly to DVBViewer and play it there again, as i was used to, I would appreciate it very much,

      Bernhard

      support.zip




      master-1.m3u8
    • mani tehrani
      By mani tehrani
      hi
      how can i reduce size of  recorded files with ffmpeg tasks? for example how can i change bitrate and convert "mpg" recorded files to MP4?
      i know some channels are HD and others are SD, is there different?
    • Bernhard Berger
      By Bernhard Berger
      Hi,
       
      nachdem ich nun alle TV Geräte hier im Haushalt mit Android TV Boxen ausgestattet habe (1x nvidia Shield, 3x Xiaomi Mi Box 3) auf denen allesamt Kodi 17.6 und 18.x läuft´bräuchte ich eine Lösung um gewisse Kanäle (vorwiegend 1080i TS Streams) zu transcodieren, da die deinterlacing Methoden unter Android erstens ziemlich mieserable sind und zweitens die Xiaomi Mi Boxen zu schwach um 1080i deinterlacen zu können).
       
      720p, 720i und 1080p funktioniert tadellos und bräuchte kein Transcoding.
       
      Hat jemand eine Idee wie ich das bewerkstelligen kann?
       
       
      Zusatzfrage:
      ist mit aktuellen Nightlies bereits QSV Interlacing möglich? In allen Foren Postings hier findet man nur Infos zu YaDiff SW De-Interlacing. Nachdem hier aber 4+ Clients laufen werden die allesamt teilweise parallel deinterlacing bräuchten (Scaling, Bitrate-Beschneidung etc. ist eigentlich nicht notwendig, da lokales 5G Netzwerk) würde ich das schon gern Hardwareseitig lösen (i5-3470T).
       
      Wie müssten die Parameter aussehen, wenn ich ausschließlich deinterlacen möchte?
       
       
      PS: eigentlich würde ich auch gerne die Tonspuren unangetastet lassen.
    • Josezkaos
      By Josezkaos
      As I commented this issue in another thread dedicated to NVIDIA transcoding, I'll create a new one for this as I think is interesting.
       
      I've recorded a short clip from a DVB-T stream with DVBViewer:
       
      http://www.mediafire.com/?aoe7406d87h3k
       
      If QSV Decoder would work with live streams, this would be enought:
       
      But that fails.
       
      Somehow, if the stream is copied and piped into another ffmpeg ... it works:
       
      Stream is copied, decoded with H264_QSV and then encoded with H264_QSV, all under HW Acceleration.
       
      But this workaround is not valid for Recording Services:
       
      Seems the pipe lunches another instance which can't reach RS output pipe ({outfile}).
       
      Why use QSV on Decoder and Encoder for transcoding live streams?
       
      1. Decoded frames are in Video Memory, not in System Memory this way, so Encoding runs way more faster saving time moving those decoded frames between memories.
      2. Deinterlacing with QSV avoids using CPU, once again faster and saving CPU for other processes running.
       
      Does anyone know how to get RS to transcode live streams using QSV for Decoding and Encoding?
       
      Thanks in advance (specially to Griga and majstang who replied in the other thread).
×
×
  • Create New...