Xomos Posted May 19, 2014 Share Posted May 19, 2014 Is it possible to use DisEqC 1.1 (8 lnb ) with DVBViewer on only DisEqC 1.0 is supported ? 1 Quote Link to comment
Derrick Posted May 19, 2014 Share Posted May 19, 2014 Good question but you have to be more specific. DVBViewer is a tv-appl. that can send any diseqc command to lnbs, multi switches or rotors. In case of an IP-TV box ( e.g. Octopus-Net from DD) the box has to send the commands. IP>Tv protocol doesn't mention diseqc 1.1 in particular but I guess it already hurts to write the word diseqc in the specs cos diseqc was invented by Eutelsat and ip>tv is from SES Quote Link to comment
Griga Posted May 19, 2014 Share Posted May 19, 2014 It is possible if the SAT>IP server is the DVBViewer Recording Service, because DVBViewer as client sends additional data (beyond the SAT>IP specifications) to it. No go with other SAT>IP servers, though. Quote Link to comment
Xomos Posted May 20, 2014 Author Share Posted May 20, 2014 Thank you for the answer. I read DVBViewer little manual and I've noticed settings only for diseqc 1.0 (sat>ip) when it comes to hardware server (sat>ip) , for instance: Inverto Airscreen Server support also only DiSEqC1.0 protocol. So I concluded that only DiSEqC1.0 is supported by sat>ip . Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.