Jump to content
chris576

Demoversion und TRIAX SAT>IP Server

By chris576, in Einsteigerfragen DVBViewer Pro/GE

Recommended Posts

chris576    0

chris576
Posted

Hallo,

 

kann ich mit der Demoversion über IP gestreamtes Fernsehen von einem  TSS 400 MKII SAT>IP Server wiedergeben? Oder bedeute die Einschränkung "keine Netzwerkgeräte", dass dies nicht möglich ist?

 

Ich habe einen TRIAX SAT>IP Server und suche nun nach einem entsprechendem Programm für meinen Windows Rechner. Bevor ich die Proversion kaufe, wollte ich gerne ausprobieren, ob das auch funktioniert.

 

Gruß,

Chris 

Share this post

Link to post
This thread is quite old. Please consider starting a new thread rather than reviving this one.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
Go To Topic Listing

  • Similar Content

    • pastimer2
      Triax tss-400 IP converter and diseqc 1.0 support
      By pastimer2
      Hi all,
       
      Has anyone been able to operate Triax TSS-400 IP Converter with diseqc 1.0 (either 2/1 or 4/1) ?
      The documentation does not mention Diseqc support.
       
      Kind regards,
       
      Pastimer2
    • superboy2015
      dvbviewerdemo.exe - Anwendungsfehler
      By superboy2015
      Hallo,
       
      ich plane einen TV Server mit 4 x DVB-T2 und 4x DVB-S2 Tunern (TBS) zu installieren. Vorzugsweise Windows. Nun habe ich zum Test die Demoversion von DVBViewer heruntergeladen und installiert. Jedoch bekomme ich beim Ausführen der Datei dvbviewerdemo.exe nur eine Fehlermeldung (siehe Anhang). Das Supporttool.exe liefert die identische Meldung (siehe Anhang).  Falls die Programme als Administrator ausgeführt werden, schließen sich beide nach 1 Sekunde ohne Fehlermeldung.
       
      Fehlt evtl. eine Abhängigkeit wie .NET oder JAVA?
       
      Windows 10 Pro Version 1803 Build 17134.81 mit Intel G4600T auf einem Fujitsu D3417-B2 und 1x KVR24E17S8/8MA RAM.
       
      Danke
       


    • Michael Bladowski
      Freeze bei HD Sendern
      By Michael Bladowski
      hallo,
       
      seit ein paar tagen friert mir der DVBViewer (pro aktuellste version) ständig ein. die daten kommen von einem triax tss 400 und mit VLC kann ich alle HD sender sehen, daher bin ich etwas ratlos wieso das ding komplett einfriert. der prozess muss gekillt werden, da lässt sich leider nix machen. hat jemand eine idee woran das liegen könnte ?
    • userip
      TransEdit: force TCP AVP for SAT>IP sources
      By userip
      Hi,
       
      Using the TransEdit, some times I use software SAT>IP servers for testing. Some of these servers, like the Recording Service, support the TCP streaming (aka RTSP AVP Interlaved). And inside the "TransEdit.ini" file I see the entry "UseTCP.X" for each tuner. However, it only works with RS sources.
       
      Please, can you expand this support for any SAT>IP server? I know, not all support it, but if they support it, then will be very useful.
       
      Thank you!
    • userip
      TransEdit: Streaming filtering PIDs in the SERVER
      By userip
      Hi,
       
      After a lot of time requesting the Streaming button in the TransEdit tool, finally the last version 4.2.1 has it! THANK YOU! :-)
      http://www.DVBViewer.tv/forum/topic/56627-streaming-button-in-transedit/
       
      Now, I have another suggestion. If you use SAT>IP servers as your tuners, you know for sure that a lot of servers doesn't support the Full Transport streaming. Yes, almost all support "pids=all", and this it's great. However, when the TS has a high bandwidth, or it goes over a specific bitrate, in this case the resulting RTP streaming has a lot of Continuity Errors. This, isn't a problem for the internal Analyzer of the TransEdit, as the PSI tables can be readed multiple times. However, if you like to do an streaming, this can be a problem.
       
      So, here it's my suggestion: At time, when you select with the mouse multiple pids in the Analyzer and you start the streaming (CTRL+S), then you're sending only the selected pids. And this it's great! Thank you! However, the TransEdit are in fact receving the full TS. So the filtering it's internal. But, if you include in the configuration some option, it should be possible to request to the tuner to only send the selected pids. And when the streaming stops, or some change occurs in the pid list, then update the list (and when no streaming, then restablish the "pids=all").
       
      This will be a must have for SAT>IP servers! With this any external tool can be used for TS analysis, using the TransEdit as a TUNER.
      Please, consider it.
      Regards.
       
×
×
  • Create New...