Jump to content
Jakub Klos

Recording issue

Recommended Posts

Jakub Klos

Hello

I seem to have an intermittent problem when some recording bears the proper file size (a few GB of data) but the actual playback works only the first 2 minutes.

Find the logs below. The only thing I can see is that there is a number of discontinuities. However, some recordings which have them too work just fine.

 

I was also able to find out that after the issue occurs there is no plugin requests to decode the channel anymore. It simply stops.

 

Other channels work just fine at the time.

I think the recording service or DVBViewer should detect this issue and retune/restart the recording at least.

I am not sure what the cause could be but at least provide us with some recovery.

 

That would be very nice. Please consider my suggestion.
Thank you very much

 

11.10.15 19:58:14.304 TVCR No shutdown allowed next recording: 11.10.2015 19:59:00
11.10.15 19:58:14.304 TRecordingEngine ReleaseReference TStreamClient: 0
11.10.15 19:58:16.473 Release Sat>IP 1
11.10.15 19:58:16.473 Destroy Sat>IP 1
11.10.15 19:58:16.785 Destroyed Sat>IP 1
11.10.15 19:58:16.785 hamDeleted Sat>IP 1
11.10.15 19:59:01.026 TRecording AllocateHardware Sat>IP 1
11.10.15 19:59:01.026 TRecording StartRecording Sat>IP 1
11.10.15 19:59:01.026 TRTSPNetworkStream SetTuner TType: 1, Freq: 11977, Symrate: 30000, LOF: 10600, Tone: 1, Pol: 0, DiseqC: 3, FEC: 3, APID: 1703, VPID: 1702, PMT: 1701, SID: 2017, TID: 2802, NID: 187, SatMod: 6, DiseqCVal: 0, Flags: 25
11.10.15 19:59:01.229 TRecording StartRecording: HBO
11.10.15 19:59:01.260 SetStandbyblock TRecording
11.10.15 19:59:01.260 TRecordingEngine AddReference TRecording: 1
11.10.15 20:03:10.221 TRecordingEngine AddReference TStreamClient: 2
11.10.15 20:03:10.237 TRecordingEngine AddReference TStreamClient: 3
11.10.15 20:03:10.252 TStreamClient AllocateHardware Sat>IP 2
11.10.15 20:03:10.252 TRTSPNetworkStream SetTuner TType: 1, Freq: 11804, Symrate: 28000, LOF: 10600, Tone: 1, Pol: 1, DiseqC: 0, FEC: 5, APID: 511, VPID: 501, PMT: 500, SID: 30309, TID: 703, NID: 1536, SatMod: 0, DiseqCVal: 0, Flags: 25
11.10.15 20:03:20.767 TRecordingEngine ReleaseReference TStreamClient: 2
11.10.15 20:03:24.370 Release Sat>IP 2
11.10.15 20:03:24.370 Destroy Sat>IP 2
11.10.15 20:03:24.636 Destroyed Sat>IP 2
11.10.15 20:03:24.636 hamDeleted Sat>IP 2
11.10.15 20:03:24.963 TRecordingEngine ReleaseReference TStreamClient: 1
11.10.15 20:33:40.198 TRecordingEngine AddReference TStreamClient: 2
11.10.15 20:33:40.198 TRecordingEngine AddReference TStreamClient: 3
11.10.15 20:33:40.213 TStreamClient AllocateHardware Sat>IP 2
11.10.15 20:33:40.213 TRTSPNetworkStream SetTuner TType: 1, Freq: 11804, Symrate: 28000, LOF: 10600, Tone: 1, Pol: 1, DiseqC: 3, FEC: 5, APID: 761, VPID: 751, PMT: 750, SID: 30314, TID: 703, NID: 1536, SatMod: 1, DiseqCVal: 0, Flags: 25
11.10.15 20:33:52.740 TRecordingEngine ReleaseReference TStreamClient: 2
11.10.15 20:34:03.395 TRecordingEngine ReleaseReference TStreamClient: 1
11.10.15 20:34:03.551 TRecordingEngine AddReference TStreamClient: 2
11.10.15 20:34:03.551 TRecordingEngine AddReference TStreamClient: 3
11.10.15 20:34:03.551 TStreamClient AllocateHardware Sat>IP 2
11.10.15 20:34:03.551 TRTSPNetworkStream SetTuner TType: 1, Freq: 11900, Symrate: 28000, LOF: 10600, Tone: 1, Pol: 0, DiseqC: 0, FEC: 4, APID: 5000, VPID: 4044, PMT: 3450, SID: 3480, TID: 12, NID: 1, SatMod: 0, DiseqCVal: 0, Flags: 25
11.10.15 20:34:17.778 TRecordingEngine ReleaseReference TStreamClient: 2
11.10.15 20:37:37.365 TRecordingEngine ReleaseReference TStreamClient: 1
11.10.15 20:37:37.490 TRecordingEngine AddReference TStreamClient: 2
11.10.15 20:37:37.490 TRecordingEngine AddReference TStreamClient: 3
11.10.15 20:37:37.490 TStreamClient AllocateHardware Sat>IP 2
11.10.15 20:37:48.114 TRecordingEngine ReleaseReference TStreamClient: 2
11.10.15 20:43:18.522 TRecordingEngine ReleaseReference TStreamClient: 1
11.10.15 20:43:21.159 Release Sat>IP 2
11.10.15 20:43:21.159 Destroy Sat>IP 2
11.10.15 20:43:21.471 Destroyed Sat>IP 2
11.10.15 20:43:21.471 hamDeleted Sat>IP 2
11.10.15 22:04:00.802 TRecording AllocateHardware Sat>IP 1
11.10.15 22:04:00.802 TRecording StartRecording Sat>IP 1
11.10.15 22:04:00.802 TRecording StartRecording: HBO
11.10.15 22:04:00.817 TRecordingEngine AddReference TRecording: 2
11.10.15 22:20:00.048 TRecording ($00BD6510) C:\Users\Public\Videos\Into the Woods.ts Discontinuities: 10 - Total size: 4,75 GB - Device:Sat>IP 1
11.10.15 22:20:00.048 TRecording Release Sat>IP 1
11.10.15 22:20:00.048 TRecordingEngine ReleaseReference TRecording: 1
11.10.15 23:15:24.500 TRecordingEngine Time changed
11.10.15 23:50:00.504 TRecording ($00BCFAD0) C:\Users\Public\Videos\Storyteller.ts Discontinuities: 6 - Total size: 2,55 GB - Device:Sat>IP 1
11.10.15 23:50:00.504 TRecording Release Sat>IP 1
11.10.15 23:50:00.504 TRecording Destroy Sat>IP 1
11.10.15 23:50:00.770 TRecording Destroyed Sat>IP 1
11.10.15 23:50:00.770 TRecording hamDeleted Sat>IP 1
11.10.15 23:50:00.770 ReleaseStandbyblock TRecording
11.10.15 23:50:00.770 TRecordingEngine ReleaseReference TRecording: 0

Share this post


Link to post
This thread is quite old. Please consider starting a new thread rather than reviving this one.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Content

    • sir drake
      By sir drake
      Hallo Griga,
      ich möchte ein meinem Programm neben dem CHANNEL-NAME auch die Quelle( SAT/Internet...HLS Deutsch....)  einer Aufnahme anzeigen.
      In einem TIMER-RECORD habe kann ich hierfür den Node  <CHANNEL ID> zerlegen und benutzen.
      In einem RECORDING-RECORD habe ich nur den Node >CHANNEL>xxxx</CHANNEL>
      Das reicht leider für meine Zwecke nicht aus.

      <recording id="98" charset="255" start="20181021195500" duration="001000">
      <channel>Das Erste</channel>
      <channel ID>1234567890</channel ID>
      <file>
      d:\_aufnahmen\2018-10-21_19-59-23_das erste_tagesschau.ts
      </file>
      <title>Tagesschau</title>
      <image>2706243175_SM.jpg</image>
      </recording>
       
      Vielleicht kannst du diesen Node optional beim Aufruf hinzufügen:
       
      ....://localhost:8089/api/recordings.html?utf8=1&amp;images=1;channel_id=1
       
       
      vg & Dank 
      Sir Drake
    • corvy
      By corvy
      I have many recordings in both MediaPortal and DVBlink that I would like to import. I have successfully imported from Mediaportal to DVBLink but how can I import to DVBViewer media service? Is there any way to do this? I have been contemplating to change the XML file names to TXT and do the import tool from the desktop client. Any ideas? 
    • tim copperfield
      By tim copperfield
      The listview used for EPG search results allows sorting up/down by clicking headers.
      The sorting appears to sorta work - clicking 'Start' for example, attempts to sort by date + time, resulting with listview showing correct data.
       
      However, clicking each individual EPG entry in the sorted list results in different dates/program names being displayed.
       
      How to reproduce:
       
      1) Search for anything in EPG
      2) Try sorting by start time (for example)
      3) Try clicking various results and compare "Event" title and time/date with the ones shown in "Details" tab below.
       
      Example: 
       

       
      Here, the EPG is searched, and sorted by start time, ascending.
      The search order looks correct, but clicking the entry shows  completely different results in Details.
      The "hover over" content however looks OK (it is the program in question as noted by Event Title and description.
       
      EDIT: There appear to be other sort order issues (i.e. sorting by station name doesn't appear to alphabetically sort it, either), but I think incorrect metadata issue needs to be addressed first.
       
    • tim copperfield
      By tim copperfield
      I thought I was crazy when after 6.0.4.1 upgrade the 'record' button on toolbar changed colors from gray to red, but now I see there's another problem related to this (intended?) change.
       
      When channel is recording, a red record icon overlay is visible in taskbar.
       
      However, the menubar record icon is gray.
       
      I'm not sure what the point was of changing the button on menu (it got inverted after 6.0.4.x update), so it should either go back to original gray/red when idle/recording OR the recording indicator icon in taskbar should be changed accordingly. now its not consistent and confusing to the user.
    • umtauscher
      By umtauscher
      Hi,
       
      soeben habe ich den SAT>IP-Viewer im Appstore entdeckt und Ihn direkt gekauft. (Leider gibt es keine Testdownload)
      Was mir während des ersten Tests sofort auffiel ist das sobald eine Aufnahme gestartet wird kein Empfang anderer Sender mehr möglich zu sein schein.
      Mein Sat>ip Server (Megasat MEG-8000 Sat>ip Server 3) hat 4 bzw. 8 Clientkanäle. Es sollte also doch möglich sein, andere Kanäle während eine Aufnahme anzusehen.
      Ist das nun ein Bug oder eine beabsichtigte Funktionseinschänkung? Die Fehlermeldung "Sender konnte nicht eingestellt werden" ist jedenfalls wenig hilfreich.
      Danke im Voraus für eine Antwort.
       
×
×
  • Create New...